thesis topics for m tech production engg

List Of Project/Thesis Topics For M.E. /M.TECH Mechanical Engineers.

• STRUCTURAL ANALYSIS OF A FLAT
• BED VIBRATION ANALYSIS OF A FLATBED 
• MECHANICAL AND THERMAL BUCKLING OF THIN FILMS 
• FATIGUE RESISTANCE ANALYSIS OF A FUEL INJECTION COMPONENT 
• DESIGN /ANALYSIS OF MACHINE TOOL ELEMENTS USING UNIGRAPHICS/ANSYS 
• VIBRATION ANALYSIS OF A ROTARY COMPRESSOR 
• FIELD PROBLEM OF A CABIN MOUNTING BRACKET OF LOAD-KING PRIDE 
• DESIGN AND ANALYSIS OF MINIATURE POSITIVE DISPLACEMENT PUMP 
• CAVITATION IN THE COOLING FLUID OF AN IC DIESEL ENGINE DUE TO FORCES GENERATED IN A PISTON-CYLINDER ASSEMBLY 
• INVESTIGATIONS ON SLIDING CONTACT CHARACTERISTICS OF FRP COMPOSITE BEARINGS 

• CUTTING DYNAMICS OF HIGH SPEED MACHINING OF THIN RIBBED STRUCTURES 
• STABILITY ANALYSIS OF BALL BEARING CONSIDERING THE EFFECT OF WAVINESS IN BALL BEARING ASSEMBLY SYNOPSIS 
• PRE-STRESSED MODAL ANALYSIS OF ENGINE SHROUD OF LAWN BOY ENGINE 
• OPTIMIZATION OF DIE EXTRUSION PARAMETERS USING FEM. 
• RANDOM VIBRATION ANALYSIS OF COMPRESSOR HOUSING: 
• OPTIMUM DESIGN AND ANALYSIS OF COMPOSITE DRIVE SHAFT FOR AN AUTOMOBILE 
• STRUCTURAL ANALYSIS OF A REFRIGERATOR COMPRESSOR CRANK SHAFT 
• STRUCTURAL STATIC ANALYSIS ON CRANKSHAFT BEARING ASSEMBLY 
• MODAL ANALYSIS OF INTAKE MANIFOLD OF A CARBURETTOR 
• STRUCTURAL STATIC ANALYSIS OF CYLINDER HEAD 
• OPTIMIZATION OF THE JIG DESIGN 
• MODAL ANALYSIS OF REFRIGERATOR COMPRESSOR CYLINDER HEAD 
• MODAL ANALYSIS OF VALVE PLATES AND COMPARE THE RESULTS BETWEEN THE TWO VALVE PLATES. 
• MODAL ANALYSIS OF SUCTION VALVE 
• TO PERFORM STRUCTURAL STATIC ANALYSIS ON A CRANK SHAFT 
• TO PERFORM STRUCTURAL STATIC ANALYSIS ON A FLANGE: 
• SIMULATION OF CENTRIFUGAL PUMP PERFORCE USING CFD TOOL AND OPTIMIZATION OF THE PUMP FOR THE IMPROVED PERFORMANCE 
• MODAL ANALYSIS OF MUFFLER GUARD 
• Thermal analysis of Coolant Plumbing pipe 
• HEAT TRANSFER IN THE CYLINDER HEAD OF A TWO-STROKE ENGINE 
• Chasis design for HCV 
• Analysis Of A C Class Adhesively Bonded Car Floor Structure Joints
• Analysis Of A C Class Spot Welded Car Floor Structure Joints
• Automotive System Design Of Lcv (Low Carbon Vehicle) Pick Up
• Briquette Manufacturing In A Controlled Environment And Its Effects On Combustion
•  Crash Analysis Of Student Model Lcv Chassis For Low And High Speed Rear Impact
• Design And Analysis Of Battery Carrying Structure Of An Automobile For Static And Dynamic Loading
• Design Of Lcv (Low Carbon Vehicle) Diesel Hybrid Suv
• Front Crash Analysis Of Student Model Lcv Chassis
• Projects For Mechanical Engineering Students
• Regenerative Suspension System Retrofitted To The Vehicle
• Retrofit Kers (Kinetic Energy Recovery System) To Land Rover Vehicle
• Study And Research On Regenerative Braking System
• Study On Structural Behavior Of Automotive Muffler Through Fea
• Study On Thermal Behavior Of Automotive Muffler
• Study On Thermal Behavior Of Manifold Assembly
• Thermal Behavior Of Exhaust Manifold (Thermal Fatigue Analysis)
• Thermo Electric Energy Recovery System

CAD / CAM Projects List - Abstract , Report Download

New Mechanical Projects 2020 ( All Projects Post Index List )

Related posts:

Sachin Thorat

Sachin is a B-TECH graduate in Mechanical Engineering from a reputed Engineering college. Currently, he is working in the sheet metal industry as a designer. Additionally, he has interested in Product Design, Animation, and Project design. He also likes to write articles related to the mechanical engineering field and tries to motivate other mechanical engineering students by his innovative project ideas, design, models and videos.

One thought on “ List Of Project/Thesis Topics For M.E. /M.TECH Mechanical Engineers. ”

I am looking for technical support in Fuel cell storage thesis topic. Do you any colleague to support in this topic?

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name and email in this browser for the next time I comment.

This site uses Akismet to reduce spam. Learn how your comment data is processed .

Recent Posts

Top Branches of Mechanical Engineering

Mechanical Engineering is an essential discipline of engineering encompassing many specializations, with each contributing its unique aspect to the dynamic and inventive nature of this field. With...

Shree Ram Ayodhya Murti, idol - Vector , Wallart

The Ram Lalla idol, which is installed at Ayodhya's Ram temple has many significant religious symbols from Hinduism. All 10 incarnations of Lord Vishnu are engraved on the idol. Notably, Lord Ram is...

• How it works

Useful Links

How much will your dissertation cost?

Have an expert academic write your dissertation paper!

Dissertation Services

Get unlimited topic ideas and a dissertation plan for just £45.00

Order topics and plan

Get 1 free topic in your area of study with aim and justification

Yes I want the free topic

The Best Mechanical Engineering Dissertation Topics and Titles

Published by Carmen Troy at January 5th, 2023 , Revised On May 17, 2024

Introduction 

Engineering is a vast subject that encompasses different branches for a student to choose from. Mechanical engineering is one of these branches , and one thing that trips students in the practical field is dissertation . Writing a mechanical engineering dissertation from scratch is a difficult task due to the complexities involved, but the job is still not impossible.

To write an excellent dissertation, you first need a stellar research topic. Are you looking to select the best mechanical engineering dissertation topic for your dissertation? To help you get started with brainstorming for mechanical engineering dissertation topics, we have developed a list of the latest topics that can be used for writing your mechanical engineering dissertation.

These topics have been developed by PhD-qualified writers on our team, so you can trust them to use these topics for drafting your own dissertation.

You may also want to start your dissertation by requesting a brief research proposal from our writers on any of these topics, which includes an introduction to the topic, research question, aim and objectives, literature review, and the proposed methodology of research to be conducted. Let us know  if you need any help in getting started.

Check our  dissertation example to get an idea of  how to structure your dissertation .

Review the step-by-step guide on how to write your own dissertation here.

Latest Mechanical Engineering Research Topics

Topic 1: an investigation into the applications of iot in autonomous and connected vehicles.

Research Aim: The research aims to investigate the applications of IoT in autonomous and connected vehicles

Objectives:

• To analyse the applications of IoT in mechanical engineering
• To evaluate the communication technologies in autonomous and connected vehicles.
• To investigate how IoT facilitates the interaction of smart devices in autonomous and connected vehicles

Topic 2: Evaluation of the impact of combustion of alternative liquid fuels on the internal combustion engines of automobiles

Research Aim: The research aims to evaluate the impact of the combustion of alternative liquid fuels on the internal combustion engines of automobiles

• To analyse the types of alternative liquid fuels for vehicles and their implications
• To investigate the benchmarking of alternative liquid fuels based on the principles of combustion performance.
• To evaluate the impact of combustion of alternative liquid fuels on the internal combustion engines of automobiles with conventional engines

Topic 3: An evaluation of the design and control effectiveness of production engineering on rapid prototyping and intelligent manufacturing

Research Aim: The research aims to evaluate the design and control effectiveness of production engineering on rapid prototyping and intelligent manufacturing

• To analyse the principles of design and control effectiveness of production engineering.
• To determine the principles of rapid prototyping and intelligent manufacturing for ensuring quality and performance effectiveness
• To evaluate the impact of production engineering on the design and control effectiveness of rapid prototyping and intelligent manufacturing.

Topic 4: Investigating the impact of industrial quality control on the quality, reliability and maintenance in industrial manufacturing

Research Aim: The research aims to investigate the impact of industrial quality control on the quality, reliability and maintenance in industrial manufacturing

• To analyse the concept and international standards associated with industrial quality control.
• To determine the strategies for maintaining quality, reliability and maintenance in manufacturing.
• To investigate the impact of industrial quality control on the quality, reliability and maintenance in industrial manufacturing.

Topic 5: Analysis of the impact of AI on intelligent control and precision of mechanical manufacturing

Research Aim: The research aims to analyse the impact of AI on intelligent control and precision of mechanical manufacturing

• To analyse the applications of AI in mechanical manufacturing
• To evaluate the methods of intelligent control and precision of the manufacturing
• To investigate the impact of AI on intelligent control and precision of mechanical manufacturing for ensuring quality and reliability

COVID-19 Mechanical Engineering Research Topics

Investigate the impacts of coronavirus on mechanical engineering and mechanical engineers..

Research Aim: This research will focus on identifying the impacts of Coronavirus on mechanical engineering and mechanical engineers, along with its possible solutions.

Research to study the contribution of mechanical engineers to combat a COVID-19 pandemic

Research Aim: This study will identify the contributions of mechanical engineers to combat the COVID-19 pandemic highlighting the challenges faced by them and their outcomes. How far did their contributions help combat the Coronavirus pandemic?

Research to know about the transformation of industries after the pandemic.

Research Aim: The study aims to investigate the transformation of industries after the pandemic. The study will answer questions such as, how manufacturing industries will transform after COVID-19. Discuss the advantages and disadvantages.

Damage caused by Coronavirus to supply chain of manufacturing industries

Research Aim: The focus of the study will be on identifying the damage caused to the supply chain of manufacturing industries due to the COVID-19 pandemic. What measures are taken to recover the loss and to ensure the continuity of business?

Research to identify the contribution of mechanical engineers in running the business through remote working.

Research Aim: This study will identify whether remote working is an effective way to recover the loss caused by the COVID-19 pandemic? What are its advantages and disadvantages? What steps should be taken to overcome the challenges faced by remote workers?

Dissertation Topics in Mechanical Engineering Design and Systems Optimization

Topic 1: mini powdered metal design and fabrication for mini development of waste aluminium cannes and fabrication.

Research Aim: The research will focus on producing and manufacturing copula furnaces and aluminium atomisers with available materials to manufacture aluminium powder metal.0.4 kg of refined coke will be chosen to measure content and energy balance and calculate the design values used to produce the drawings.

Topic 2: Interaction between the Fluid, Acoustic, and vibrations

Research Aim: This research aims to focus on the interaction between the Fluid, Acoustic, and vibrations

Topic 3: Combustion and Energy Systems.

Research Aim: This research aims to identify the relationship between Combustion and Energy Systems

Topic 4: Study on the Design and Manufacturing

Research Aim: This research will focus on the importance of design and manufacturing

Topic 5: Revolution in the Design Engineering

Research Aim: This research aims to highlight the advances in design engineering

Topic 6: Optimising HVAC Systems for Energy Efficiency

Research Aim: The study investigates different design configurations and operational strategies to optimise heating, ventilation, and air conditioning (HVAC) systems for energy efficiency while maintaining indoor comfort levels.

Topic 7: Impact of Building Design Parameters on Indoor Thermal Comfort

Research Aim: The research explores the impact of building design parameters, such as insulation, glazing, shading, and ventilation, on indoor thermal comfort and energy consumption.

Topic 8: An Empirical Analysis of Enhanced Security and Privacy Measures for Call Taxi Metres

Research Aim: The research explores the methods to enhance the security and privacy of call taxi meter systems. It explores encryption techniques for sensitive data transmission and authentication protocols for driver and passenger verification.

Topic 9: An Investigation of Optimising Manifold Design

Research Aim: The study investigates various designs for manifolds used in HBr/HCl charging systems. It focuses on factors such as material compatibility, pressure control, flow rates, and safety protocols. 

Topic 10: Implementation of a Plant Lean Transformation

Research Aim: The research examines the implementation process and outcomes of a Lean Transformation in a plant environment. It focuses on identifying the key factors contributing to successful adoption and sustained improvement in operational efficiency. 

Topic 11: Exploring Finite Element Analysis (FEA) of Torque Limiters

Research Aim: Exploring the use of FEA techniques to simulate the behaviour of torque limiters under various loading conditions. The research provides insights into stress distribution and deformation.

Dissertation Topics in Mechanical Engineering Innovations and Materials Analysis

Topic 1: an overview of the different research trends in the field of mechanical engineering..

Research Aim: This research aims to analyse the main topics of mechanical engineering explored by other researchers in the last decade and the research methods. The data used is accumulated from 2009 to 2019. The data used for this research is used from the “Applied Mechanics Review” magazine.

Topic 2: The Engineering Applications of Mechanical Metamaterials.

Research Aim: This research aims to analyse the different properties of various mechanical metamaterials and how they can be used in mechanical engineering. This research will also discuss the potential uses of these materials in other industries and future developments in this field.

Topic 3: The Mechanical Behaviour of Materials.

Research Aim: This research will look into the properties of selected materials for the formation of a product. The study will take the results of tests that have already been carried out on the materials. The materials will be categorised into two classes from the already prepared results, namely destructive and non-destructive. The further uses of the non-destructive materials will be discussed briefly.

Topic 4: Evaluating and Assessment of the Flammable and Mechanical Properties of Magnesium Oxide as a Material for SLS Process.

Research Aim: The research will evaluate the different properties of magnesium oxide (MgO) and its potential use as a raw material for the SLS (Selective Laser Sintering) process. The flammability and other mechanical properties will be analysed.

Topic 5: Analysing the Mechanical Characteristics of 3-D Printed Composites.

Research Aim: This research will study the various materials used in 3-D printing and their composition. This research will discuss the properties of different printing materials and compare the harms and benefits of using each material.

Topic 6: Evaluation of a Master Cylinder and Its Use.

Research Aim: This research will take an in-depth analysis of a master cylinder. The material used to create the cylinder, along with its properties, will be discussed. The use of the master cylinder in mechanical engineering will also be explained.

Topic 7: Manufacturing Pearlitic Rail Steel After Re-Modelling Its Mechanical Properties.

Research Aim: This research will look into the use of modified Pearlitic rail steel in railway transportation. Modifications of tensile strength, the supported weight, and impact toughness will be analysed. Results of previously applied tests will be used.

How Can ResearchProspect Help?

ResearchProspect writers can send several custom topic ideas to your email address. Once you have chosen a topic that suits your needs and interests, you can order for our dissertation outline service , which will include a brief introduction to the topic, research questions , literature review , methodology , expected results , and conclusion . The dissertation outline will enable you to review the quality of our work before placing the order for our full dissertation writing service !

Electro-Mechanical Dissertation Topics

Topic 8: studying the electro-mechanical properties of multi-functional glass fibre/epoxy reinforced composites..

Research Aim: This research will study the properties of epoxy-reinforced glass fibres and their use in modern times. Features such as tensile strength and tensile resistance will be analysed using Topic 13: Studying the Mechanical and Durability different current strengths. Results from previous tests will be used to explain their properties.

Topic 9: Comparing The Elastic Modules of Different Materials at Different Strain Rates and Temperatures.

Research Aim: This research will compare and contrast a selected group of materials and look into their elastic modules. The modules used are the results taken from previously carried out experiments. This will explain why a particular material is used for a specific purpose.

Topic 10: Analysing The Change in The Porosity and Mechanical Properties of Concrete When Mixed With Coconut Sawdust.

Research Aim: This research will analyse the properties of concrete that are altered when mixed with coconut sawdust. Porosity and other mechanical properties will be evaluated using the results of previous experiments. The use of this type of concrete in the construction industry will also be discussed.

Topic 11: Evaluation of The Thermal Resistance of Select Materials in Mechanical Contact at Sub-Ambient Temperatures.

Research Aim: In this research, a close evaluation of the difference in thermal resistance of certain materials when they come in contact with a surface at sub-ambient temperature. The properties of the materials at the temperature will be noted. Results from previously carried out experiments will be used. The use of these materials will be discussed and explained, as well.

Topic 12: Analysing The Mechanical Properties of a Composite Sandwich by Using The Bending Test.

Research Aim: In this research, we will analyse the mechanical properties of the components of a composite sandwich through the use of the bending test. The results of the tests previously carried out will be used. The research will take an in-depth evaluation of the mechanical properties of the sandwich and explain the means that it is used in modern industries.

Mechanical Properties Dissertation Topics

Topic 13: studying the mechanical and durability properties of magnesium silicate hydrate binders in concrete..

Research Aim: In this research, we will evaluate the difference in durability and mechanical properties between regular concrete binders and magnesium silicate hydrate binders. The difference between the properties of both binders will indicate which binder is better for concrete. Features such as tensile strength and weight it can support are compared.

Topic 14: The Use of Submersible Pumping Systems.

Research Aim: This research will aim to analyse the use of a submersible pumping system in machine systems. The materials used to make the system, as well as the mechanical properties it possesses, will be discussed.

Topic 15: The Function of a Breather Device for Internal Combustion Engines.

Research Aim: In this research, the primary function of a breather device for an internal combustion engine is discussed. The placement of this device in the system, along with its importance, is explained. The effects on the internal combustion engine if the breather device is removed will also be observed.

Topic 16: To Study The Compression and Tension Behaviour of Hollow Polyester Monofilaments.

Research Aim: This research will focus on the study of selected mechanical properties of hollow polyester monofilaments. In this case, the compression and tension behaviour of the filaments is studied. These properties are considered in order to explore the future use of these filaments in the textile industry and other related industries.

Topic 17: Evaluating the Mechanical Properties of Carbon-Nanotube-Reinforced Cementous Materials.

Research Aim: This research will focus on selecting the proper carbon nanotube type, which will be able to improve the mechanical properties of cementitious materials. Changes in the length, diameter, and weight-based concentration of the nanotubes will be noted when analysing the difference in the mechanical properties. One character of the nanotubes will be of optimal value while the other two will be altered. Results of previous experiments will be used.

Topic 18: To Evaluate the Process of Parallel Compression in LNG Plants Using a Positive Displacement Compressor

Research Aim: This research aims to evaluate a system and method in which the capacity and efficiency of the process of liquefaction of natural gas can avoid bottlenecking in its refrigerant compressing system. The Advantages of the parallel compression system in the oil and gas industry will be discussed.

Topic 19: Applying Particulate Palm Kernel Shell Reinforced Epoxy Composites for Automobiles.

Research Aim: In this research, the differences made in applying palm kernel shell particulate to reinforced epoxy composites for the manufacturing of automobile parts will be examined. Properties such as impact toughness, wear resistance, flexural, tensile, and water resistance will be analysed carefully. The results of the previous tests will be used. The potential use of this material will also be discussed.

Topic 20: Changes Observed in The Mechanical Properties of Kevlar KM2-600 Due to Abrasions.

Research Aim: This research will focus on observing the changes in the mechanical properties of Kevlar KM2-600 in comparison to two different types of S glass tows (AGY S2 and Owens Corning Shield Strand S). Surface damage, along with fibre breakage, will be noted in all three fibres. The effects of the abrasions on all three fibres will be emphasised. The use of Kevlar KM2 and the other S glass tows will also be discussed, along with other potential applications.

Order a Proposal

Worried about your dissertation proposal? Not sure where to start?

• Choose any deadline
• Plagiarism free
• Unlimited free amendments
• Free anti-plagiarism report
• Completed to match exact requirements

Industrial Application of Mechanical Engineering Dissertation Topics

Topic 1: the function of a fuel injector device..

Research Aim: This research focuses on the function of a fuel injector device and why this component is necessary for the system of an internal combustion engine. The importance of this device will be explained. The adverse effects on the entire system if the equipment is either faulty or completely removed will also be discussed.

Topic 2: To Solve Optimization Problems in a Mechanical Design by The Principles of Uncertainty.

Research Aim: This research will aim to formulate an optimization in a mechanical design under the influence of uncertainty. This will create an efficient tool that is based on the conditions of each optimisation under the risk. This will save time and allow the designer to obtain new information in regard to the stability of the performance of his design under uncertainties.

Topic 3: Analysing The Applications of Recycled Polycarbonate Particle Materials and Their Mechanical Properties.

Research Aim: This research will evaluate the mechanical properties of different polycarbonate materials and their potential to be recycled. The materials that can be recycled are then further examined for potential use as 3-dimensional printing materials. The temperature of the printer’s nozzle, along with the nozzle velocity matrix from previous experiments, is used to evaluate the tensile strength of the printed material. Other potential uses of these materials are also discussed.

Topic 4: The Process of Locating a Lightning Strike on a Wind Turbine.

Research Aim: This research will provide a detailed explanation of the process of detecting a lightning strike on a wind turbine. The measurement of the magnitude of the lightning strike, along with recognising the affected area will be explained. The proper method employed to rectify the damage that occurred by the strike will also be discussed.

Topic 5: Importance of a Heat Recovery Component in an Internal Combustion Engine for an Exhaust Gas System.

Research Aim: The research will take an in-depth evaluation of the different mechanics of a heat recovery component in an exhaust gas system. The functions of the different parts of the heat recovery component will be explained along with the importance of the entire element itself. The adverse effect of a faulty defective heat recovery component will also be explained.

“Feel free to contact us if you require custom dissertation topics and titles for your dissertation. ResearchProspect Ltd is a UK registered academic writing company which can provide you with highly qualified writers to assist you in the process of the formation of your dissertation. For more information about the type of services we offer.“

Related: Civil Engineering Dissertation

Important Notes:

As a student of mechanical engineering looking to get good grades, it is essential to develop new ideas and experiment on existing mechanical engineering theories – i.e., to add value and interest to the topic of your research.

The field of mechanical engineering is vast and interrelated to so many other academic disciplines like  civil engineering ,  construction ,  law , and even  healthcare . That is why it is imperative to create a mechanical engineering dissertation topic that is particular, sound and actually solves a practical problem that may be rampant in the field.

We can’t stress how important it is to develop a logical research topic; it is the basis of your entire research. There are several significant downfalls to getting your topic wrong: your supervisor may not be interested in working on it, the topic has no academic creditability, the research may not make logical sense, and there is a possibility that the study is not viable.

This impacts your time and efforts in  writing your dissertation as you may end up in a cycle of rejection at the very initial stage of the dissertation. That is why we recommend reviewing existing research to develop a topic, taking advice from your supervisor, and even asking for help in this particular stage of your dissertation.

Keeping our advice in mind while developing a research topic will allow you to pick one of the best mechanical engineering dissertation topics that not only fulfill your requirement of writing a research paper but also add to the body of knowledge.

Therefore, it is recommended that when finalizing your dissertation topic, you read recently published literature in order to identify gaps in the research that you may help fill.

Remember- dissertation topics need to be unique, solve an identified problem, be logical, and can also be practically implemented. Take a look at some of our sample mechanical engineering dissertation topics to get an idea for your own dissertation.

How to Structure Your Mechanical Engineering Dissertation

A well-structured   dissertation can help students   to achieve a high overall academic grade.

• A Title Page
• Acknowledgments
• Declaration
• Abstract: A summary of the research completed
• Table of Contents
• Introduction : This chapter includes the project rationale, research background, key research aims and objectives, and the research problems to be addressed. An outline of the structure of a dissertation can also be added to this chapter.
• Literature Review :  This chapter presents relevant theories and frameworks by analysing published and unpublished literature available on the chosen research topic in light of research questions to be addressed. The purpose is to highlight and discuss the relative weaknesses and strengths of the selected research area whilst identifying any research gaps. Break down of the topic and key terms can have a positive impact on your dissertation and your tutor.
• Methodology: The  data collection  and  analysis methods and techniques employed by the researcher are presented in the Methodology chapter, which usually includes  research design, research philosophy, research limitations, code of conduct, ethical consideration, data collection methods, and  data analysis strategy .
• Findings and Analysis: The findings of the research are analysed in detail under the Findings and Analysis chapter. All key findings/results are outlined in this chapter without interpreting the data or drawing any conclusions. It can be useful to include  graphs , charts, and   tables in this chapter to identify meaningful trends and relationships.
• Discussion and  Conclusion: The researcher presents his interpretation of results in this chapter and states whether the research hypothesis has been verified or not. An essential aspect of this section of the paper is to draw a linkage between the results and evidence from the literature. Recommendations with regard to the implications of the findings and directions for the future may also be provided. Finally, a summary of the overall research, along with final judgments, opinions, and comments, must be included in the form of suggestions for improvement.
• References:  This should be completed in accordance with your University’s requirements
• Bibliography
• Appendices: Any additional information, diagrams, graphs that were used to  complete the  dissertation  but not part of the dissertation should be included in the Appendices chapter. Essentially, the purpose is to expand the information/data.

About ResearchProspect Ltd

ResearchProspect is a  UK-based academic writing service that provides help with  Dissertation Proposal  Writing,  PhD proposal writing ,  Dissertation Writing ,  Dissertation Editing, and Improvement .

Our team of writers is highly qualified. They are experts in their respective fields. They have been working in the industry for a long, thus are aware of the issues as well as the trends of the industry they are working in.

Need more Topics.?

Free Dissertation Topic

Phone Number

Academic Level Select Academic Level Undergraduate Graduate PHD

Academic Subject

Area of Research

Review Our Best Dissertation Topics 2021 complete list.

Frequently Asked Questions

How to find dissertation topics about mechanical engineering.

To discover mechanical engineering dissertation topics:

• Research recent advancements.
• Explore industry challenges.
• Consider sustainability or automation.
• Review academic journals.
• Consult with professors.
• Opt for a niche aligning with your passion and career aims.

You May Also Like

The Law of the EU has gained a growing amount of academic attention, especially since the UK decided to leave the union. Concerns are growing about how EU law will continue to impact the UK constitution.

If you are looking for a dissertation topic, you can find one here. We have listed some of the best dissertation topics on graphic design. Choose one and get started immediately!

Here is a list of sports dissertation topics to help you choose the one studies any one as per your requirements.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

List of M.Tech theses guided

Master's theses supervised in ieor.

• Neeraj Naik: Mainline Rail Operations : Study of Speed Differential & Optimal Train Allowances (2024) 
• Vishal: Line Planning and Timetabling in Public Transportation: Models and Methods (2024)
• Peddi Madhav: Crew Scheduling: Heuristics and Exact Methods (2024)
• K. Geetha Bhargavi: Direct Despatch Opportunity Prediction and Order Fulfilment Models (2023)
• Himanshu Damani: Warehouse Operations Analysis (2023)
• Palkesh Bhidodiya: Congestion Metrics & Routing Techniques for Rail Freight Networks, (2023)
• Akshat Bansal: Crew Scheduling for Long-distance Passenger Railway Transportation (2022)
• Utkarsh V. Konge: Supply Chain Archetype Framework & Container Train Scheduling for Multi-terminal Port (2022)
• Abhijith P.Y. [with Santosh Noronha]: Deep Learning in Chemometrics (2022)
• Amit B. Gadekar: Hierarchical Forecasting Models (2022)
• Taposh Kumar Kapuria: Revenue Management of Perishable Products in a Retail Supply Chain with Optimal Inventory Rationalizing Strategy [with Youssef Boulaksil] (2021)
• A. Tarun Raj: Demand Forecasting and Inventory Management of Automobile Spare Parts (2020)
• P. Sandeep Kumar: [as co-guide with S.SenGupta], Scheduling Freight Trains on a Mixed-Traffic Network to Minimise Energy Consumption (2020)
• Mohammad Mufassir Khan: [as co-guide with P. Balamurugan], Predictive Analytics in Healthcare Data (2020)
• P. Mallikarjuna Reddy: [as co-guide with Jayendran Venkateswaran], Demand Forecasting in tractor manufacturing industry (2020)
• Ratnesh Srivastava: [as co-guide with Jayendran Venkateswaran], Industrial Engineering application in Production unit (2020)
• Gaurav Amrutkar: [as co-guide with S.SenGupta]: Handling Categorical Features of High Cardinality in Tree/Rule-based Classification (2019)
• Saurav Adhikari: [as co-guide with S.SenGupta]: Dynamic Pricing Strategies in Indian Domestic Airlines (2019)
• Sourav Mondal: [as co-guide with S.SenGupta]: Runtime Estimation for Railway Timetabling (2019)
• Aayush Aggarwal: Robustness in Railway Timetables (2018)
• Anuj Sahu: Maintenance and Capacity Analysis of Railway Networks (2018)
• Anand Singh: (2018)
• Vipin Maurya: Analysing Railway Networks by Simulation and Parametric Modeling to Improve Freight Operations (2018)
• Harshit Gupta: Process Design and Improvements in a SME [with J. Venkateswaran] (2018)
• R. Vidyadhar: Simulation and critical Analysis of Railway Networks (2017)
• Vinay Rai: Data Analysis of Parameters Related to Kidney Transplant Procedures (2017)
• Rakesh Kumar Sharma: Managing Freight Traffic on Rail Networks : Analysis of Terminal Operations (2016)
• Abhijeet Kalpande: Failure Diagnostics and Predictive Analytics in Automotive Systems (2016)
• G. Sai Muni Teja: Fleet management in rail transport: Coal rakes in Indian Railways (2015)
• Naveed Farhan, Selection of Representative Configurations in Highly Customized Automobiles by Large Scale Optimization (2015)
• Shilpi Bhargava, Passenger Demand Forecasting and Dynamic Pricing to support Premium Trains on Indian Railways (2015)
• Vishal Rewari: Fleet management in rail transport: Petroleum rakes in Indian Railways (2014)
• Joydeep Ghosh: Co-integration in Time Series Analysis [with A. Subramanyam] (2014)
• Ruchir Santuka: Improved Formulations for Cutting Stock Problem with Set-up Cost [with Ashutosh Mahajan] (2014)
• Anoop Chatterjee, Priority based Task-level Scheduling in Multi-project, Multi-resource environments (2013)
• Keshav Kumar Singh: Modeling and Design of algorithms for rail operations and Capacity Planning (2013)
• Rohan Rao: Part Demand Prediction in Mass Customization Environment (2013)
• Rajesh Sharma: Pricing of assets in rail operations and third party logistics services (2013)
• Anoop Chaterjee: Priority based Task-level Scheduling in Multi-project, Multi-resource environments (2013)
• Priya Agrawal: Facility Design and Operational Strategies for Railway Networks (2012)
• Anand Rajak: Modelling and Computations in Multi Echelon Supply Chain network Design of FMCG Industry (2012)
• Sunil Kumar: Transfer pricing and transportation cost allocation in a global steel supply chain (2011)
• Pratik Fadadu: Network level Investments to Improve Rail Capacity (2011)
• Dileep Damayyawar: Inventory Planning and Management of Cold Storage Facility for Grapes (2011)
• Meghraj Nalge : Adaptive Traffic Control Methods with Downstream Detection System (2010)
• Rajat Choudhary : Vehicle Routing Problem : Application to Routing of Vehicles for Distributing Meals under Mid Day Meal Scheme (2010)
• Abhishek Singh Verma: Production Planning and scheduling in Automotive Paint Shops (2009)
• Tilak Raj Singh: Airline Crew Planning and Management (2008)
• Piyush Verma: Timetabling and Operations Planning in Railway Networks (2008)
• Manish Kumar Singh: Optimal Booking Strategies for a Shipper Dealing with a Monopolistics Logistics Carrier (2008)
• Amey Kamat : Optimization problems in sensor network design [with Mani Bhushan ] (2007)
• Deepika Taneja : Pricing for third party logistics service providers (2007)
• Sharad Kumar Shrivastava : scheduling problems using constraint satisfaction programming [with S.B. Patkar ] (2007)
• Vineet Kapoor : Demand sensing and its application in revenue management (2007)
• Braja Gopal Das : Applications of revenue management (2006)
• Chetan Desai : Supply chain strategies and inaccuracy modeling in RFID-enabled system  (2006)
• Nishant Patil : Winner determination in combinatorial auctions (2006)
• Rakesh Ambre : An event based simulation model for railway train scheduling (2006)
• Mitesh Gupta: Cost and Revenue based approach to new product introduction and product rationalisation (2005)
• Seema Ramteke : Preparation of train timetables (2005)
• Shivaji Dhekane : Management of perishable inventories with RFID technology (2005)
• P.Subramaniam : Vehicle Routing problems (2004)
• Ravindra Gokhale : Simulation studies on railway line capacity [with N.Hemachandra ] (2004)
• Vaishali Moharir : Optimal pricing and operating policies for competing modes of transport [with N.Hemachandra ] (2004)
• Mitali Johri : Railway Scheduling and capacity planning - A Simulation based approach (2003)
• Sudhir K. Sinha : Analysis of operating costs and pricing models on transport networks [with Milind Sohoni ] (2003)
• B.Raghuram : Rakelinking for suburban train services using constraint satisfaction [with M.Sohoni ] (2001)
• K.Chandrashekar : Policies for new product introduction and old product withdrawal [with N.Hemachandra ] (2001)
• Maj. S.Bahel : Maintenance management information system in army repair establishment (2000)
• Nitish Dave: A Decision support system for announcing sales promotion schemes in perishable supply chains using Markov decision processes [with N.Hemachandra ] (2000)
• Rahul J. Patil : Materials management practices in growing small scale industries: a supply chain management perspective [with Rahul Pandey ] (2000)
• Shrinivas Asanare : Suburban railway timetabling using CHIP (2000)
• Ashok Kumar: Scheduling of trains on railway sections [with P.G.Awate ] (1999)
• Chetan Ghatole : Spatial allocation of resources using geographical information system [with Rangan Banerjee ] (1999)
• Hemant Trivedi : Time tabling of rail services (1999)
• Shashi Bhusan Mani Tripathi : Application of BPR in supply chains - A case study [with A.S.Babu ] (1999)
• S.S.Nagaonkar : Modelling handovers and simulation based performance evaluation [with N.Hemachandra and A. Wolisz ] (1999)
• Maj. O.P.Yadav : Productivity measurement and improvement in army base workshops (1998)
• Alok Kumar: Systems for planning for material availability and control of production flows (JIT) [with P.G.Awate ] (1997)
• Chetan Soman : Supply chain management (1997)
• Mahesh Shenoy : Timetabling for suburban railways (1997)
• T.Ravi Kumar: Development of PDMS module in RDBMS framework [with A.S.Babu ] (1997)
• Vinayak Paranjape : Policies for closed loop control of loading items at a bottleneck facility in a refrigerator manufacturing plant [with P.G.Awate ] (1997)
• Erwin Paes : Robust techniques for combinatorial problems (1996)
• N.Patwardhan : Analysis of human aspects of TQM implementation (1996)
• Ashok Agarwal : Application of OR models in mail operations (1995)
• R.Agre : Multistage batch sizing with joint set up costs with application to steel industry [with P.G.Awate ] (1995)
• B.C.S.Krishnamohan : Capacity estimation and enhancement of transportation networks (1994)
• S.Venkatraman : Development of educational test package for single facility capacitated dynamic lot sizing [with P.G.Awate ] (1994)
• J.R.Suresh : Crew scheduling in urban bus transport (1993)
• George Paes : Multilevel programming - algorithms and applications (1992)

Master's theses supervised in Mechanical Engineering

• Lokesh Borkar: Generation and Analysis of Transportation Networks for Identification of Critical Links [with A.Tewari] (2018)
• Deepak Miglani: Simulation and Analysis of Mixed Traffic in Railway Junctions (2017)
• Ajinkya Deshpande: Planning for multi-modal transport operations in urban areas (2017)
• Ayush Agrawal: Optimization and Simulation of Railway Networks (2016)
• Abhirath Sharma: Managing empty rake operations in Western Railway Zone (2016)
• Krishna Agrawal: An analysis of train running data in suburban train operations (2016)
• Hussain Bharmal: Design and Operations of Indian Railways (2015)
• Mohit Uppal: Network Analysis of Semiconductor Global Production Network (2015)
• Shashank Dangayach: Technical Analysis of Suburban Railway Network (2014)
• Vipul Depal: Analysis of Safety in the Mumbai Rail System (2011)
• Tarun Mohan Mathur: Modeling Urban Taxi Networks (2010)
• Pulkit Jain: Capacity Analysis in Transport sectors (2009)
• Yogesh Jain: Forecasting Models for Travel demand (2009)
• Manik Bahadur: Optimization in Airline Operations and Planning (2008)
• Shailesh Lekhwani: Pricing and Revenue Management in Transport Sector and Logistics (2008)
• Akshay Saxena : Combinatorial optimization by probabilistic methods [with N.Hemachandra] (2007)
• Gaurav Singla : Bilevel Programming in Supply chain management (2007)
• Rasik N. Patel: Framework for 3D shape optimization and manufacturing of polished diamonds [with Milind Sohoni ] (2006)
• Kartik Raghupati : Procurement problems and combinatorial auctions [with N.Hemachandra ] (2005)
• Adesh Nath Rawal : Supply chain management for the textile sector (2004)
• B.N.Vishnu : A simulation model for operations management and capacity evaluation at railway stations (2003)
• Kamalesh K. Somani : Supply chain optimization: Agri supply chains, and Ant colony optimization models for VRP (2003)
• S.Rajagopal : Strategies for co- ordinating buyer-supplier interactions in electronic marketplaces, [with N.Hemachandra ] (2001)
• Prasad S. Phatak : Crew scheduling for bus transport, an implementation using column generation (1997)
• Rudra Kumar: Warehouse location problems (1997)
• K.Girish : Analysis of planned relayout for a motors plant (1996)
• Niraj Gupta: Multi-product integrated production-distribution system (1996)
• A.S.Bajwa : Cost effective and strategic relocation and design of main stores for switch board factory for Siemens Ltd, Kalwa (1995)

Master's theses guided in Electrical Engineering

• R.V.Satwik [with Madhu Belur]: Reinforcement Learning to Improve Railway Timetabling (2022)
• Darshit Jain [with Madhu Belur]: Suburban timetabling: modulo-simplex methods and optimization (2019)
• Vipin Shukla [with Madhu Belur] Railway junction simulator development (2019)
• Anurag Agrawal: Aperiodic Railway Timetable Optimization on a suburban rail network - Case study on Mumbai Harbour line [with Madhu Belur] (2018)

Master's theses guided in Computer Science and Engineering

• Peeyush Gupta: Signal Spacing and Capacity Improvement for Railways  [with Abhiram Ranade] (2013)
• Devendra Shelar: SketchRail, A Railway Network Configuration Editor [with Abhiram Ranade] (2012)
• S.Chandran : Suburban railway timetabling [with M.Sohoni ] (2003)
• Kedar S. Nadkarni : Competitive traffic modeling [with M.Sohoni ] (2002)

Master's thesis guided in Aerospace Engineering

• Tannishtha Sanyal: Optimization Studies related to Airline Maintenance Scheduling [with R.K.Pant] (2009)
• Ameya Behere: Air and High Speed Rail Transport: Competition and Integration [with R.P.Shimpi] (2016)

Master's theses guided in Mathematics

• Julie Shah: Optimal strategies for scheduling in a railway section (1997)
• Priya Mahadevan : Operationally feasible scheduling of trains on a rail network (1997)

Master of Management

UKnowledge > College of Engineering > Mechanical Engineering > Manufacturing Systems Engineering > Theses & Dissertations

Theses and Dissertations--Manufacturing Systems Engineering

Theses/dissertations from 2023 2023.

OPERATIONALIZING A CULTURE FOR SUCCESSFUL LEAN TRANSFORMATIONS: A FRAMEWORK AND MODEL-BASED TOOLS , Amir Najarzadeh Dr.

Advanced Microstructural Characterization of Functionally Graded Dental Ceramic Material for Materials-Informed Finishing , Angani Vigneswaran

Theses/Dissertations from 2022 2022

The Toyota Production System (TPS) in a Non-Traditional Manufacturing Environment: The Role of Standardization in the Fast-Food industry , Kevin McCracken

Theses/Dissertations from 2020 2020

Numerical Analyses and Integration of Split Lot Sizing Using Lean Benchmark Model for Small Lot Manufacturing in High Mix Low Volume Production , Omkar Bhosale

Theses/Dissertations from 2019 2019

AN ANALYSIS OF RESISTANCE SPOT WELD QUALITY BASED ON ACOUSTIC AND ELECTRICAL SIGNATURES , Ivan Charles Butler

IMPLEMENTATION AND ANALYSIS OF TRUE LEAN IN A STARTUP COMPANY BY USING PDCA MODEL, A CASE STUDY IN A MANUFACTURING VENTURE , Ankit Jangid

INVESTIGATION OF CHIP-FORM AND TOOL-WEAR IN TURNING OF HARDENED AF9628 ALLOY UNDER VARIOUS COOLING AND LUBRICATION CONDITIONS , Jason Wolf

Theses/Dissertations from 2015 2015

ALTERNATE MODELS FOR NATURAL GAS TRANSPORTATION SYSTEM PERFORMANCE OPTIMIZATION , Gnana Shekaran Arumugam

Theses/Dissertations from 2013 2013

Modeling of Biorefinery Supply Chain Economic Performance with Discrete Event Simulation , Joseph S. Amundson

SUPPLIER SUSTAINABILITY EVALUATION UTILIZING MULTI ATTRIBUTE UTILITY MODELING , Scott E. Ladd

AN OBSERVATIONAL STUDY OF THE METHODS AND PROGRESS IN ENTERPRISE LEAN TRANSFORMATION AT A LEARNING HEALTH CARE ORGANIZATION , Christopher Michael Rosenbaum

Theses/Dissertations from 2012 2012

A STUDY OF QUEUING THEORY IN LOW TO HIGH REWORK ENVIRONMENTS WITH PROCESS AVAILABILITY , Adam J. Brown

ECONOMIC MODELING & OPTIMIZATION OF A REGION SPECIFIC MULTI-FEEDSTOCK BIOREFINERY SUPPLY CHAIN , William H. Faulkner

Theses/Dissertations from 2011 2011

ACHIEVING ULTRAFINE GRAINS IN Mg AZ31B-O ALLOY BY CRYOGENIC FRICTION STIR PROCESSING AND MACHINING , Anwaruddin Mohammed

Advanced Search

• Notify me via email or RSS

Browse by Author

• Collections
• Disciplines

Author Corner

• Submit Research

New Title Here

Below. --> connect.

• Law Library
• Special Collections
• Copyright Resource Center
• Graduate School
• Scholars@UK

• We’d like your feedback

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

University of Kentucky ®

An Equal Opportunity University Accreditation Directory Email Privacy Policy Accessibility Disclosures

Student Theses

•                     PhD                 
•                   MTech (Research)                  
•                   MTech                   

•                   MSc                   

• Top Colleges
• Top Courses
• Entrance Exams
• Admission 2024
• Study Abroad
• Study in Canada
• Study in UK
• Study in USA
• Study in Australia
• Study in Germany
• IELTS Material
• Scholarships
• Sarkari Exam
• Visual Stories
• College Compare
• Write a review
• Login/ Register
• Login / Register

M.Tech Production Engineering Syllabus and Subjects

M.Tech Production Engineering syllabus encompasses two years divided in four semesters. The syllabus comprises theoretical and practical subjects dealing with planning, designing, developing, and managing various processes to produce high quality products. The postgraduate production engineering course is designed to focus on developing industry relevant skills and knowledge in students. Some common M.Tech Production Engineering subjects are Facilities Planning, Value Engineering, Project Management, Supply Chain Management, Total Quality Management, Quality Engineering, Work Design and Ergonomics, Operations Planning and Control etc.

Semester Wise M.Tech Production Engineering Syllabus

Production Engineering M.Tech syllabus focuses on studying various manufacturing technologies and manufacturing process related-subjects. It introduces aspirants to a broad range of production engineering concepts that are further categorised into several specializations. Seminar topics for M.Tech Production Engineering emphasize on in-depth learning of concepts related to topics like Facilities Planning, Value Engineering, Project Management, Supply Chain Management, Total Quality Management, Quality Engineering, Work Design and Ergonomics, Operations Planning and Control etc. The semester wise breakdown of the M.Tech Production Engineering syllabus is as given below: 

M.Tech Production Engineering Subjects

The subjects in M.Tech Production Engineering are designed to enhance the expertise of students in manufacturing technology, the main objective of which is to accomplish the manufacturing processes effectively and efficiently. The M.Tech Production Engineering syllabus includes both theoretical classroom based teaching and practical lab sessions for better understanding of advanced application related concepts. Students study both core and elective subjects to make the two year-long program more flexible. M.Tech in Production Engineering subjects list is as follows:

• Facilities Planning
• Value Engineering
• Project Management
• Supply Chain Management
• Total Quality Management
• Quality Engineering
• Work Design and Ergonomics
• Operations Planning and Control 

M.Tech Production Engineering Course Structure

M.Tech Production Engineering course structure is designed to include both core and elective subjects. The course is composed of two years divided into four semesters. In the first year, students are introduced to fundamental production engineering subjects. While in the second year, students are introduced to specific subjects relating to their specialization. In addition, practical lab sessions enhance the understanding of theoretical concepts. The course structure is as follows:

• IV Semesters
• Core Subjects
• Elective Subjects
• Practical Workshops
• Project/ Thesis Submission

M.Tech Production Engineering Teaching Methodology and Techniques

The M.Tech Production Engineering curriculum involves different teaching methods. Along with lectures and practical training, the students are skilled in elective subjects of various specializations. The teaching methodology is designed to offer industry based learning to the students. Listed below are the teaching methodology and strategies in general:

• Group Projects
• Conceptualized Learning
• Traditional Classroom Based Teaching
• Practical Lab Sessions
• Talks from guest speakers
• Semester Abroad Opportunities

M.Tech Production Engineering Projects

M.Tech Production Engineering projects are given to students for interdisciplinary learning. Projects for M.Tech Engineering assist students in getting hands-on experience and training in industrial work. Projects ensure application of concepts learnt and enhance the creativity of students. Some popular M.Tech thesis topics in Production Engineering are:

• Automatic Reverse Braking System
• Fabrication of Pneumatic Material Handling Equipment
• Accident Avoiding System in Punching Machine
• Pneumatic Reciprocating Water Pumping System
• Automatic Gate Open/Close System

M.Tech Production Engineering Reference Books

Production Engineering M.Tech books are available both online and offline in many publications. Students must invest in reference books after proper introspection. Reference books are useful for better learning and clear understanding of subjects. Some of the best reference books for M.Tech Production Engineering are: 

Top M.Tech Production Engineering Colleges

Delhi,Delhi NCR

IIT Varanasi (BHU)

Varanasi,Uttar Pradesh

NIT Rourkela

Rourkela,Odisha

Amity University Noida

Noida,Uttar Pradesh

MNIT Jaipur

Jaipur,Rajasthan

MNNIT Allahabad

Allahabad,Uttar Pradesh

Sri Venkateswara University (SVU)

Tirupati,Andhra Pradesh

Top Engineering Entrance Exams

Result Date: Apr 25, 2024

• Eligibility Criteria

Exam Date: May 26, 2024

M.Tech Production Engineering Fee Structure

Indian Institute of Technology Bombay

Centre for technology alternatives for rural areas (ctara).

• HOD's Message
• CTARA Brochure
• MDP Students
• M Tech First Year Students
• M Tech Second Year Students
• PhD Students
• Rural Technology Action Group (RuTAG)
• Nutrition Group
• Unnat Bharat Abhiyan (UBA)
• Unnat Maharashtra Abhiyan (UMA)
• Technology and Development Solutions Cell
• Sustainable Energy and Entrepreneurial Development (SEED)
• Potential PhD topics
• Previous Papers
• M. Tech Admissions
• MDP Admissions
• Course Structure
• Summer Field Stay 2015 Listing
• Summer Field Stay 2016 Listing
• Summer Field Stay 2017 Listing
• Institute Information Brochure

M.Tech Project Reports

• Institute Information Brouchure
• M Tech Placements
• Events archive
• News Archive
• CTARA Academic Calendar
• Photo Gallery
• Video Gallery
• CSR Study Unit
• Innovations

Search form

By Year Wise

M.Tech Project Reports 2019-2021

M.Tech Project Reports 2018-2020

M.Tech Project Reports 2017-2019

M.Tech Project Reports 2016-2018

M.Tech Project Reports 2015-2017

M.Tech Project Reports 2014-2016

M.Tech Project Reports 2013-2015

M.Tech Project Reports 2012-2014

M.Tech Project Reports 2011-2013

M.Tech Project Reports 2010-2012

M.Tech Project Reports 2009-2011

M.Tech Project Reports 2008-2010

© 2019 CTARA, IIT Bombay. All rights reserved

• Maintained by IT team

• more THI pages
• semester dates
• PRIMUSS Application portal
• PRIMUSS student's portal
• Student Council website

Automotive Production Engineering (M. Eng.)

The Master's degree course Automotive Production Engineering aims at giving a deep and detailed theoretical, technical and practical understanding of production systems in the automotive environment and their strategic, planning, and operational development processes in conjunction with the product development.

Regarding manufacturing technologies, engineering processes and production strategies, the applicant is familiar with the current level of knowledge and is able to expand his/her knowledge base independently in the complex field of production. The knowledge acquired in the Masters Automotive Production Engineering enables graduates to deal with qualified specialist and management tasks in the field of production, factory planning or technology development. They might as well aim at continuing to do a doctorate.

In addition to ex-cathedra teaching, the programme includes both an Scientific Research Seminar (former Individual Project) in the 1st semester and a Group Project in the 2nd semester, having 5 ECTS each. This project works are always a full semester time activity. Under the supervision of a university senior lecturer the student will be introduced to industrial problems and  scientific working methods.

1. Semester

Engineering Processes in Automotive Industry

Production and Logistics Networks

Adv. Manufacturing Techologies

Cost Engineering & Riskmanagement

Scientific Research Seminar

Individual Elective

2. Semester

Automation and Equipment Technologies

Technology Development & Innovation management

Digital Technologies in Engineering

Production System & Plant Design

Group Project

3. Semester

Master´s thesis

• Application dates Applications for this degree may be submitted through the online application system from November 15th-January 15th for the summer term.

Requirements The successful completion of a Bachelor´s or "Diplom"-degree in Engineering or Science, or an equivalent degree at a German university with a minimum of 210 credit points (in conformity with General Examination Regulations) - or - the successful completion of an equivalent degree at a foreign university. Admission restrictions are decided for each semester and are usually published in April each year. The average mark required and the waiting time for receiving a place are not decided in advance, but depend on the number of applicants and available capacity.

Please find further information regarding the application process  here. (if you get to a German website, please press the English button "en" in the menue bar again)

Dubious Application Agencies

Currently, THI is receiving an increasing amount of information regarding fraudulent activities in connection with student applications to THI. Therefore, it is important for you to know the following:

• THI does not work with agencies. Please apply directly to THI via the Primuss application portal.
• THI never asks for money via agencies for application purposes. 
• THI only sends emails from @thi.de. 
• THI never asks for money before you receive your admission letter. If you need a VPD from uni-assist, you will have to pay a processing fee to uni-assist. However, uni-assist only checks certain documents and does not grant admission to THI. 
• The application process is conducted in the THI Primuss portal. Only there will you be able to access your application progress.

Graduates would be suited for following job profiles:

• production planner
• plant and operating resource planner
• plant developer
• production engineer
• planning and production management or technology developer. 

As of winter semester 2024/25, THI charges service fees of 500 euros per semester for students from third countries (outside the EU and the EAA (European Economic Area) . If you have any questions, please go to

  Contact for prospective students

Please note: No service fees for exchange students, visiting students, participants of summer school!

• Other fees amount to around 70 euros student union fee per semester.

General information on scholarship:

Financing your study programme might be a big challenge for you. On our homepage you find different opportunities of financing your academic studies at our university. Link:

Financial assistance

Please note that financial aid programmes are mostly not open to foreign students. For scholarships for students from abroad you may have a look here:

https://www.daad.de/deutschland/stipendium/datenbank/en/12359-finding-scholarships/ Public funding (BAföG) is only available to Germans and to EU citizens if they have spent a considerable part of their education in Germany. The university awards a scholarship called Deutschlandstipendium once a year which cannot fully cover living expenses. Additionally we have limited funds and support some international students for a maximum of one semester. Please do not actively approach the International Office on scholarships, once a year a call for application automatically reaches all international students.

Third party scholarship:

• If you are an applicant from abroad, you may qualify for a scholarship from the German Academic Exchange Service (DAAD): www.daad.de
• If you are a German students we recommend to research for suitable scholarships on www.mystipendium.de
• Please note that we cannot offer any guidance or support concerning scholarship applications.

We recommend that single students budget at least 700-900 EUR per month to meet personal expenses (accommodation, health insurance, stay, books, semester contribution)

Application requirements

Students will have to document considerable experience in the field of automotive production as well as proof of their English skills. The new requirements for the course are:

• The successful completion of a Bachelor´s or "Diplom"-degree in Engineering, Mechanical Engineering, Automotive Engineering, Mechatronics or an equivalent degree at a German university with a minimum of 210 credit points (in conformity with General Examination Regulations) - or - the successful completion of an equivalent degree at a foreign university
• A successfully passed aptitude test (according to § 4 of Examination Regulations)  with following criteria: documented proof of experience in the field of Automotive Production by internship and/or project work/academic papers.
• Proof of sufficient English language skills, documented by an English test (Level B2) all equivalent can be found  here  (Allgemeine Satzungen - Anerkannte Englischtests B2)

The above named requirements may also be changed for the coming application period, so please inform yourself again on our website before you apply. GRE is not required. The selection of the applicants is based on grades and the results of the aptitude test. However, check the visa regulations. It may be that TOEFL/IELTS is required in order to get a visa.

There is no requirement to formally prove German language skills for your admission. You may start with little or no German language proficiency. However, German is the official national language in Germany. The transition from your home country to the German university system and every day life will be made easier the more German you know. Furthermore, German skills will greatly increase your chances in finding a student job and or an internship at a German company.

To prepare for your semester abroad or to learn another foreign language alongside your studies, you can take language courses at THI's own Language Center (Sprachenzentrum). The language courses are taught only by native speakers and offered at different levels. All courses are free of charge for our students. For more information please see https://www.thi.de/studium/sprachenzentrum. THI does not run any student housing – neither on-campus nor off-campus – and therefore cannot provide you with accommodation. Here you can find more information on finding accommodation: Accomodation in Ingolstadt.

Our International Office is established especially for the international academic programs. The International Office provides an all-round service to help you with all necessary prearrangements for the organization of your study and everyday life in Ingolstadt.

Contact options for prospective students

Apply online   Application from Nov. 15 to Jan. 15 only!  

Academic director

Module Handbook

The module handbook is the guide to all modules of the degree programme. It contains information on prerequisites, contents, learning outcomes, ECTS points, duration, work load, literature and references.

WS 2024/25_MHB_M-APE

Module handbook electives

WS 2024/25_MHB_FW_M-APE

Study and Examination Regulations

Study and examination regulations (SPO) deal with judicial matters concerning your study course. Please turn to the pages of the legal department for Statutes of this course.

For any questions on requirements, exams regulations and more, please turn to the Service Center Study Affairs .

Semester dates

Accreditation

100 MTech Project Ideas for Electronics and Electrical Engineering

This article lists the 100 detailed MTech project ideas for Electronics and Electrical Engineering students.

Table of Contents

MTech Project Ideas

Here, I’ll provide an overview of various project ideas across different domains within Electronics and Electrical Engineering . These ideas are intended to inspire and guide M.Tech students in their project endeavors.

Power Systems and Renewable Energy Projects

Control systems and automation projects, electronics and communication projects, embedded systems and microcontroller projects, signal processing and imaging projects, electrical machines and drives projects, nanotechnology and advanced materials projects, robotics and artificial intelligence projects, biomedical engineering and healthcare technology projects, emerging technologies and innovative projects.

These 100 M.Tech project ideas are helpful for Electronics and Electrical Engineering students and cover a wide range of advanced topics, from traditional power systems and renewable energy to cutting-edge fields like nanotechnology, AI, and cybersecurity.

If you liked this article, then please subscribe to our YouTube Channel for Electrical, Electronics, Instrumentation, PLC, and SCADA video tutorials.

Share With Your Friends

Recommended articles, 1 thought on “100 mtech project ideas for electronics and electrical engineering”.

Up date me on Industrial Automation projects ideal for Mtech Level

Leave a Comment Cancel reply

More articles.

Academia.edu no longer supports Internet Explorer.

To browse Academia.edu and the wider internet faster and more securely, please take a few seconds to  upgrade your browser .

Enter the email address you signed up with and we'll email you a reset link.

• We're Hiring!
• Help Center

M.Tech Thesis Sample Format

Related Papers

Govinda Nahak

The user has requested enhancement of the downloaded file. All in-text references underlined in blue are added to the original document and are linked to publications on ResearchGate, letting you access and read them immediately.

anna barrett

Dr.Priyanka chavhan

Humaiz Shaikh

orpir felixmary

rohan mishra

Tutors India

Thesis writing is an important task assigned to the candidates pursing engineering. A thesis written reflects the ideas and concepts of author and his knowledge towards the idea being presented. Thus while writing a thesis one should follow the guidelines and formats mentioned. Characteristics of a thesis 1. Style: 2. Linking chapters 3. Titles 4. Ambiguity and clarity 5. Precision 6. Brevity Our dissertation writing services at Tutors India cover all aspects of the study – topic selection for your dissertation writing, research proposal for dissertation writing, writing a literature review, research methodology writing, quantitative/qualitative analysis and interpretation and data collection works. Our seasoned team of subject matter experts has been collaborating with students from different universities around the world. When you Order any reflective report at Tutors India, we promise you the following Plagiarism free Always on Time, Outstanding customer support, Written to Standard, Unlimited Revisions support, High-quality Subject Matter Experts. Contact: Website: www.tutorsindia.com Email: [email protected] United Kingdom: +44-1143520021 India: +91-4448137070 Whatsapp Number: +91-8754446690 Reference: https://bit.ly/2VGFEPa

Loading Preview

Sorry, preview is currently unavailable. You can download the paper by clicking the button above.

RELATED PAPERS

Zdenek Pliva , Jindra Drábková , Jan Koprnický , Leoš Petržílka

Mangatas Situmorang

ياسر راجح جميل

Atia Ur-Rehman

Abhay Kumar

syahir jared

Robertus Willy

Somnath Bhakat

Irwanmazwan Ibrahim

I-Made Astina

Warsaw University of Technology Digital Library

Jacek Wytrębowicz

Wan Abdullah

ASHIR ALI Civil Engineering

Ahmed Alkhaldi

Bozhena Tikhonova

Dr. Ibrahim Suliman

IAEME Publication

jyoti kumari

Tajinder Singh

Syed U M E R Rehan

New Trends and Issues Proceedings on Advances in Pure and Applied Sciences

•   We're Hiring!
•   Help Center
• Find new research papers in:
• Health Sciences
• Earth Sciences
• Cognitive Science
• Mathematics
• Computer Science
• Academia ©2024

MTech | B.Tech | Ph.D Project Topics in Computer Science for 2024

Embark on an enriching academic journey with our meticulously curated selection of MTech | B.Tech | Ph.D project topics in Computer Science for 2024. Aligned with trending IEEE base papers , this compilation serves as a guiding light for MTech enthusiasts seeking innovative projects accompanied by concise abstracts and associated base papers.

Table of Contents

Diverse Range in Cutting-edge Areas

Our selection spans a wide spectrum of cutting-edge areas within Computer Science , addressing the latest challenges and advancements in the field. Each project title is strategically chosen to align with the burgeoning trends in the industry while ensuring compliance with esteemed IEEE standards.

Frontiers of Technological Evolution

From machine learning algorithms and applications of artificial intelligence to network security and innovations in data science, these projects encapsulate the forefront of technological evolution. They represent the dynamic landscape and offer an opportunity to explore and contribute to the rapid advancements in Computer Science.

Gateway for Students, Researchers, and Professionals

Whether you’re a student, researcher, or industry professional, our collection provides an expansive gateway to delve into and contribute to the dynamic landscape of Computer Science. The accompanying abstracts offer a comprehensive glimpse into the project’s scope, methodologies , and potential impacts, empowering you to make informed decisions for your research journey.

Artificial Intelligence MTech | B.Tech | Ph.D Project Topics 2024

Chat With Expert

Explore more Artificial Intelligence topics

Cloud Computing MTech | B.Tech | Ph.D Project Topics 2024

Explore more Cloud Computing topics

Machine Learning MTech | B.Tech | Ph.D Project Topics 2024

Explore more Machine Learning Topics

Computer Network MTech | B.Tech | Ph.D Project Topics 2024

Explore more Computer Network Topics

Internet Of Things (IoT) MTech | B.Tech | Ph.D Project Topics 2024

Explore more IoT Topics

Image Processing Based MTech | B.Tech | Ph.D Project Topics 2024

Explore more Image Processing Topics

Python Based MTech | B.Tech | Ph.D Project Topics 2024

Explore more Python Based Topics

Java Based MTech | B.Tech | Ph.D Project Topics 2024

Explore more Java Based Topics

Data Mining MTech | B.Tech | Ph.D Project Topics 2024

Explore more Data Mining Topics

Himanshu Garg

Experienced Engineering Mentor and Educator | Empowering Students to Excel. With a passion for guiding and empowering engineering students, I am dedicated to supporting their academic journey and fostering their success. With a strong background in Process Control (instrumentation), I completed my Mtech in 2020. Passionate about helping students excel, aims to introduce new modules addressing mental stress problems and other crucial areas in Engineer's Planet. Connect with me to explore opportunities for collaboration and support in engineering education.

Guidance for Engineers: Insights through Stories

Exploring the top 10 python projects 2024, you may also like, ieee papers for cse students, computer science projects free downloads, computer science | c | c++ projects free..., computer science php projects free downloads, computer science projects | machine learning | deep..., data architecture: the evolution of next generation, application of ai in cybersecurity: benefits, uses, and..., go beyond basic chatbot: explore advanced nlp techniques, major projects on cyber security final year, tensorflow based projects for final year, leave a reply cancel reply.

This site uses Akismet to reduce spam. Learn how your comment data is processed .

• Mentorship Sessions
• M.Tech Projects R&D
• Ph.D Projects R&D
• B.Tech Projects R&D
• 1. Internship
• 2. Workshops
• 3. Bootcamp

IMPORTANT LINKS

• Announcements New
• Project Downloads
• Career / Internship
• Privacy Policy
• Terms & Conditions
• Patent Assistance NEW
• MTech Projects Hot
• PhD Projects New
• BTech Projects
• AMIE Projects
• DBMS Projects Hot
• ECE & EEE Projects
• Research Paper
• Thesis Report

Fabrum Planet Solutions Pvt. Ltd.

• [email protected]
• +91 8882479344
• Delhi | Mumbai | Kolkata | Chennai

© 2024 All Rights Reserved Engineer’s Planet

Digital Media Partner #magdigit 

• Terms & Conditions

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. OK Read More