how long should an intro to a research paper be

How to Write a Research Paper Introduction (with Examples)

The research paper introduction section, along with the Title and Abstract, can be considered the face of any research paper. The following article is intended to guide you in organizing and writing the research paper introduction for a quality academic article or dissertation.

The research paper introduction aims to present the topic to the reader. A study will only be accepted for publishing if you can ascertain that the available literature cannot answer your research question. So it is important to ensure that you have read important studies on that particular topic, especially those within the last five to ten years, and that they are properly referenced in this section. 1 What should be included in the research paper introduction is decided by what you want to tell readers about the reason behind the research and how you plan to fill the knowledge gap. The best research paper introduction provides a systemic review of existing work and demonstrates additional work that needs to be done. It needs to be brief, captivating, and well-referenced; a well-drafted research paper introduction will help the researcher win half the battle.

The introduction for a research paper is where you set up your topic and approach for the reader. It has several key goals:

• Present your research topic
• Capture reader interest
• Summarize existing research
• Position your own approach
• Define your specific research problem and problem statement
• Highlight the novelty and contributions of the study
• Give an overview of the paper’s structure

The research paper introduction can vary in size and structure depending on whether your paper presents the results of original empirical research or is a review paper. Some research paper introduction examples are only half a page while others are a few pages long. In many cases, the introduction will be shorter than all of the other sections of your paper; its length depends on the size of your paper as a whole.

Break through writer’s block. Write your research paper introduction with Paperpal’s Generative AI features

Table of Contents

What is the introduction for a research paper, what are the parts of introduction in the research, 1. introduce the research topic:, 2. determine a research niche:, 3. place your research within the research niche:, how to use paperpal to write the introduction section, frequently asked questions on research paper introduction, key points to remember.

The introduction in a research paper is placed at the beginning to guide the reader from a broad subject area to the specific topic that your research addresses. They present the following information to the reader

• Scope: The topic covered in the research paper
• Context: Background of your topic
• Importance: Why your research matters in that particular area of research and the industry problem that can be targeted

Why is the introduction important in a research paper?

The research paper introduction conveys a lot of information and can be considered an essential roadmap for the rest of your paper. A good introduction for a research paper is important for the following reasons:

• It stimulates your reader’s interest: A good introduction section can make your readers want to read your paper by capturing their interest. It informs the reader what they are going to learn and helps determine if the topic is of interest to them.
• It helps the reader understand the research background: Without a clear introduction, your readers may feel confused and even struggle when reading your paper. A good research paper introduction will prepare them for the in-depth research to come. It provides you the opportunity to engage with the readers and demonstrate your knowledge and authority on the specific topic.
• It explains why your research paper is worth reading: Your introduction can convey a lot of information to your readers. It introduces the topic, why the topic is important, and how you plan to proceed with your research.
• It helps guide the reader through the rest of the paper: The research paper introduction gives the reader a sense of the nature of the information that will support your arguments and the general organization of the paragraphs that will follow. It offers an overview of what to expect when reading the main body of your paper.

A good research paper introduction section should comprise three main elements: 2

• What is known: This sets the stage for your research. It informs the readers of what is known on the subject.
• What is lacking: This is aimed at justifying the reason for carrying out your research. This could involve investigating a new concept or method or building upon previous research.
• What you aim to do: This part briefly states the objectives of your research and its major contributions. Your detailed hypothesis will also form a part of this section.

Craft a compelling Introduction section with Paperpal. Try Now!

How to write a research paper introduction?

The first step in writing the research paper introduction is to inform the reader what your topic is and why it’s interesting or important. This is generally accomplished with a strong opening statement. The second step involves establishing the kinds of research that have been done and ending with limitations or gaps in the research that you intend to address. Finally, the research paper introduction clarifies how your own research fits in and what problem it addresses. If your research involved testing hypotheses, these should be stated along with your research question. The hypothesis should be presented in the past tense since it will have been tested by the time you are writing the research paper introduction.

The following key points, with examples, can guide you when writing the research paper introduction section:

• Highlight the importance of the research field or topic
• Describe the background of the topic
• Present an overview of current research on the topic

Example: The inclusion of experiential and competency-based learning has benefitted electronics engineering education. Industry partnerships provide an excellent alternative for students wanting to engage in solving real-world challenges. Industry-academia participation has grown in recent years due to the need for skilled engineers with practical training and specialized expertise. However, from the educational perspective, many activities are needed to incorporate sustainable development goals into the university curricula and consolidate learning innovation in universities.

• Reveal a gap in existing research or oppose an existing assumption
• Formulate the research question

Example: There have been plausible efforts to integrate educational activities in higher education electronics engineering programs. However, very few studies have considered using educational research methods for performance evaluation of competency-based higher engineering education, with a focus on technical and or transversal skills. To remedy the current need for evaluating competencies in STEM fields and providing sustainable development goals in engineering education, in this study, a comparison was drawn between study groups without and with industry partners.

• State the purpose of your study
• Highlight the key characteristics of your study
• Describe important results
• Highlight the novelty of the study.
• Offer a brief overview of the structure of the paper.

Example: The study evaluates the main competency needed in the applied electronics course, which is a fundamental core subject for many electronics engineering undergraduate programs. We compared two groups, without and with an industrial partner, that offered real-world projects to solve during the semester. This comparison can help determine significant differences in both groups in terms of developing subject competency and achieving sustainable development goals.

Write a Research Paper Introduction in Minutes with Paperpal

Paperpal is a generative AI-powered academic writing assistant. It’s trained on millions of published scholarly articles and over 20 years of STM experience. Paperpal helps authors write better and faster with:

• Real-time writing suggestions
• In-depth checks for language and grammar correction
• Paraphrasing to add variety, ensure academic tone, and trim text to meet journal limits

With Paperpal, create a research paper introduction effortlessly. In this step-by-step guide, we’ll walk you through how Paperpal transforms your initial ideas into a polished and publication-ready introduction.

Step 1: Sign up on Paperpal and click on the Copilot feature, under this choose Outlines > Research Article > Introduction

Step 2: Add your unstructured notes or initial draft, whether in English or another language, to Paperpal, which is to be used as the base for your content.

Step 3: Fill in the specifics, such as your field of study, brief description or details you want to include, which will help the AI generate the outline for your Introduction.

Step 4: Use this outline and sentence suggestions to develop your content, adding citations where needed and modifying it to align with your specific research focus.

Step 5: Turn to Paperpal’s granular language checks to refine your content, tailor it to reflect your personal writing style, and ensure it effectively conveys your message.

You can use the same process to develop each section of your article, and finally your research paper in half the time and without any of the stress.

Craft accurate research paper introductions with Paperpal. Start writing now!

The purpose of the research paper introduction is to introduce the reader to the problem definition, justify the need for the study, and describe the main theme of the study. The aim is to gain the reader’s attention by providing them with necessary background information and establishing the main purpose and direction of the research.

The length of the research paper introduction can vary across journals and disciplines. While there are no strict word limits for writing the research paper introduction, an ideal length would be one page, with a maximum of 400 words over 1-4 paragraphs. Generally, it is one of the shorter sections of the paper as the reader is assumed to have at least a reasonable knowledge about the topic. 2 For example, for a study evaluating the role of building design in ensuring fire safety, there is no need to discuss definitions and nature of fire in the introduction; you could start by commenting upon the existing practices for fire safety and how your study will add to the existing knowledge and practice.

When deciding what to include in the research paper introduction, the rest of the paper should also be considered. The aim is to introduce the reader smoothly to the topic and facilitate an easy read without much dependency on external sources. 3 Below is a list of elements you can include to prepare a research paper introduction outline and follow it when you are writing the research paper introduction. Topic introduction: This can include key definitions and a brief history of the topic. Research context and background: Offer the readers some general information and then narrow it down to specific aspects. Details of the research you conducted: A brief literature review can be included to support your arguments or line of thought. Rationale for the study: This establishes the relevance of your study and establishes its importance. Importance of your research: The main contributions are highlighted to help establish the novelty of your study Research hypothesis: Introduce your research question and propose an expected outcome. Organization of the paper: Include a short paragraph of 3-4 sentences that highlights your plan for the entire paper

Cite only works that are most relevant to your topic; as a general rule, you can include one to three. Note that readers want to see evidence of original thinking. So it is better to avoid using too many references as it does not leave much room for your personal standpoint to shine through. Citations in your research paper introduction support the key points, and the number of citations depend on the subject matter and the point discussed. If the research paper introduction is too long or overflowing with citations, it is better to cite a few review articles rather than the individual articles summarized in the review. A good point to remember when citing research papers in the introduction section is to include at least one-third of the references in the introduction.

The literature review plays a significant role in the research paper introduction section. A good literature review accomplishes the following: Introduces the topic – Establishes the study’s significance – Provides an overview of the relevant literature – Provides context for the study using literature – Identifies knowledge gaps However, remember to avoid making the following mistakes when writing a research paper introduction: Do not use studies from the literature review to aggressively support your research Avoid direct quoting Do not allow literature review to be the focus of this section. Instead, the literature review should only aid in setting a foundation for the manuscript.

Remember the following key points for writing a good research paper introduction: 4

• Avoid stuffing too much general information: Avoid including what an average reader would know and include only that information related to the problem being addressed in the research paper introduction. For example, when describing a comparative study of non-traditional methods for mechanical design optimization, information related to the traditional methods and differences between traditional and non-traditional methods would not be relevant. In this case, the introduction for the research paper should begin with the state-of-the-art non-traditional methods and methods to evaluate the efficiency of newly developed algorithms.
• Avoid packing too many references: Cite only the required works in your research paper introduction. The other works can be included in the discussion section to strengthen your findings.
• Avoid extensive criticism of previous studies: Avoid being overly critical of earlier studies while setting the rationale for your study. A better place for this would be the Discussion section, where you can highlight the advantages of your method.
• Avoid describing conclusions of the study: When writing a research paper introduction remember not to include the findings of your study. The aim is to let the readers know what question is being answered. The actual answer should only be given in the Results and Discussion section.

To summarize, the research paper introduction section should be brief yet informative. It should convince the reader the need to conduct the study and motivate him to read further. If you’re feeling stuck or unsure, choose trusted AI academic writing assistants like Paperpal to effortlessly craft your research paper introduction and other sections of your research article.

1. Jawaid, S. A., & Jawaid, M. (2019). How to write introduction and discussion. Saudi Journal of Anaesthesia, 13(Suppl 1), S18.

2. Dewan, P., & Gupta, P. (2016). Writing the title, abstract and introduction: Looks matter!. Indian pediatrics, 53, 235-241.

3. Cetin, S., & Hackam, D. J. (2005). An approach to the writing of a scientific Manuscript1. Journal of Surgical Research, 128(2), 165-167.

4. Bavdekar, S. B. (2015). Writing introduction: Laying the foundations of a research paper. Journal of the Association of Physicians of India, 63(7), 44-6.

Paperpal is a comprehensive AI writing toolkit that helps students and researchers achieve 2x the writing in half the time. It leverages 21+ years of STM experience and insights from millions of research articles to provide in-depth academic writing, language editing, and submission readiness support to help you write better, faster.  

Get accurate academic translations, rewriting support, grammar checks, vocabulary suggestions, and generative AI assistance that delivers human precision at machine speed. Try for free or upgrade to Paperpal Prime starting at US$19 a month to access premium features, including consistency, plagiarism, and 30+ submission readiness checks to help you succeed.  

Experience the future of academic writing – Sign up to Paperpal and start writing for free!  

Related Reads:

• Scientific Writing Style Guides Explained
• Ethical Research Practices For Research with Human Subjects
• 8 Most Effective Ways to Increase Motivation for Thesis Writing 
• 6 Tips for Post-Doc Researchers to Take Their Career to the Next Level

Practice vs. Practise: Learn the Difference

Academic paraphrasing: why paperpal’s rewrite should be your first choice , you may also like, how to cite in apa format (7th edition):..., how to write your research paper in apa..., how to choose a dissertation topic, how to write a phd research proposal, how to write an academic paragraph (step-by-step guide), research funding basics: what should a grant proposal..., how to write an abstract in research papers..., how to write dissertation acknowledgements, how to write the first draft of a..., mla works cited page: format, template & examples.

Instant insights, infinite possibilities

How to write an effective introduction for your research paper

Last updated

20 January 2024

Reviewed by

However, the introduction is a vital element of your research paper . It helps the reader decide whether your paper is worth their time. As such, it's worth taking your time to get it right.

In this article, we'll tell you everything you need to know about writing an effective introduction for your research paper.

• The importance of an introduction in research papers

The primary purpose of an introduction is to provide an overview of your paper. This lets readers gauge whether they want to continue reading or not. The introduction should provide a meaningful roadmap of your research to help them make this decision. It should let readers know whether the information they're interested in is likely to be found in the pages that follow.

Aside from providing readers with information about the content of your paper, the introduction also sets the tone. It shows readers the style of language they can expect, which can further help them to decide how far to read.

When you take into account both of these roles that an introduction plays, it becomes clear that crafting an engaging introduction is the best way to get your paper read more widely. First impressions count, and the introduction provides that impression to readers.

• The optimum length for a research paper introduction

While there's no magic formula to determine exactly how long a research paper introduction should be, there are a few guidelines. Some variables that impact the ideal introduction length include:

Field of study

Complexity of the topic

Specific requirements of the course or publication

A commonly recommended length of a research paper introduction is around 10% of the total paper’s length. So, a ten-page paper has a one-page introduction. If the topic is complex, it may require more background to craft a compelling intro. Humanities papers tend to have longer introductions than those of the hard sciences.

The best way to craft an introduction of the right length is to focus on clarity and conciseness. Tell the reader only what is necessary to set up your research. An introduction edited down with this goal in mind should end up at an acceptable length.

• Evaluating successful research paper introductions

A good way to gauge how to create a great introduction is by looking at examples from across your field. The most influential and well-regarded papers should provide some insights into what makes a good introduction.

Dissecting examples: what works and why

We can make some general assumptions by looking at common elements of a good introduction, regardless of the field of research.

A common structure is to start with a broad context, and then narrow that down to specific research questions or hypotheses. This creates a funnel that establishes the scope and relevance.

The most effective introductions are careful about the assumptions they make regarding reader knowledge. By clearly defining key terms and concepts instead of assuming the reader is familiar with them, these introductions set a more solid foundation for understanding.

To pull in the reader and make that all-important good first impression, excellent research paper introductions will often incorporate a compelling narrative or some striking fact that grabs the reader's attention.

Finally, good introductions provide clear citations from past research to back up the claims they're making. In the case of argumentative papers or essays (those that take a stance on a topic or issue), a strong thesis statement compels the reader to continue reading.

Common pitfalls to avoid in research paper introductions

You can also learn what not to do by looking at other research papers. Many authors have made mistakes you can learn from.

We've talked about the need to be clear and concise. Many introductions fail at this; they're verbose, vague, or otherwise fail to convey the research problem or hypothesis efficiently. This often comes in the form of an overemphasis on background information, which obscures the main research focus.

Ensure your introduction provides the proper emphasis and excitement around your research and its significance. Otherwise, fewer people will want to read more about it.

• Crafting a compelling introduction for a research paper

Let’s take a look at the steps required to craft an introduction that pulls readers in and compels them to learn more about your research.

Step 1: Capturing interest and setting the scene

To capture the reader's interest immediately, begin your introduction with a compelling question, a surprising fact, a provocative quote, or some other mechanism that will hook readers and pull them further into the paper.

As they continue reading, the introduction should contextualize your research within the current field, showing readers its relevance and importance. Clarify any essential terms that will help them better understand what you're saying. This keeps the fundamentals of your research accessible to all readers from all backgrounds.

Step 2: Building a solid foundation with background information

Including background information in your introduction serves two major purposes:

It helps to clarify the topic for the reader

It establishes the depth of your research

The approach you take when conveying this information depends on the type of paper.

For argumentative papers, you'll want to develop engaging background narratives. These should provide context for the argument you'll be presenting.

For empirical papers, highlighting past research is the key. Often, there will be some questions that weren't answered in those past papers. If your paper is focused on those areas, those papers make ideal candidates for you to discuss and critique in your introduction.

Step 3: Pinpointing the research challenge

To capture the attention of the reader, you need to explain what research challenges you'll be discussing.

For argumentative papers, this involves articulating why the argument you'll be making is important. What is its relevance to current discussions or problems? What is the potential impact of people accepting or rejecting your argument?

For empirical papers, explain how your research is addressing a gap in existing knowledge. What new insights or contributions will your research bring to your field?

Step 4: Clarifying your research aims and objectives

We mentioned earlier that the introduction to a research paper can serve as a roadmap for what's within. We've also frequently discussed the need for clarity. This step addresses both of these.

When writing an argumentative paper, craft a thesis statement with impact. Clearly articulate what your position is and the main points you intend to present. This will map out for the reader exactly what they'll get from reading the rest.

For empirical papers, focus on formulating precise research questions and hypotheses. Directly link them to the gaps or issues you've identified in existing research to show the reader the precise direction your research paper will take.

Step 5: Sketching the blueprint of your study

Continue building a roadmap for your readers by designing a structured outline for the paper. Guide the reader through your research journey, explaining what the different sections will contain and their relationship to one another.

This outline should flow seamlessly as you move from section to section. Creating this outline early can also help guide the creation of the paper itself, resulting in a final product that's better organized. In doing so, you'll craft a paper where each section flows intuitively from the next.

Step 6: Integrating your research question

To avoid letting your research question get lost in background information or clarifications, craft your introduction in such a way that the research question resonates throughout. The research question should clearly address a gap in existing knowledge or offer a new perspective on an existing problem.

Tell users your research question explicitly but also remember to frequently come back to it. When providing context or clarification, point out how it relates to the research question. This keeps your focus where it needs to be and prevents the topic of the paper from becoming under-emphasized.

Step 7: Establishing the scope and limitations

So far, we've talked mostly about what's in the paper and how to convey that information to readers. The opposite is also important. Information that's outside the scope of your paper should be made clear to the reader in the introduction so their expectations for what is to follow are set appropriately.

Similarly, be honest and upfront about the limitations of the study. Any constraints in methodology, data, or how far your findings can be generalized should be fully communicated in the introduction.

Step 8: Concluding the introduction with a promise

The final few lines of the introduction are your last chance to convince people to continue reading the rest of the paper. Here is where you should make it very clear what benefit they'll get from doing so. What topics will be covered? What questions will be answered? Make it clear what they will get for continuing.

By providing a quick recap of the key points contained in the introduction in its final lines and properly setting the stage for what follows in the rest of the paper, you refocus the reader's attention on the topic of your research and guide them to read more.

• Research paper introduction best practices

Following the steps above will give you a compelling introduction that hits on all the key points an introduction should have. Some more tips and tricks can make an introduction even more polished.

As you follow the steps above, keep the following tips in mind.

Set the right tone and style

Like every piece of writing, a research paper should be written for the audience. That is to say, it should match the tone and style that your academic discipline and target audience expect. This is typically a formal and academic tone, though the degree of formality varies by field.

Kno w the audience

The perfect introduction balances clarity with conciseness. The amount of clarification required for a given topic depends greatly on the target audience. Knowing who will be reading your paper will guide you in determining how much background information is required.

Adopt the CARS (create a research space) model

The CARS model is a helpful tool for structuring introductions. This structure has three parts. The beginning of the introduction establishes the general research area. Next, relevant literature is reviewed and critiqued. The final section outlines the purpose of your study as it relates to the previous parts.

Master the art of funneling

The CARS method is one example of a well-funneled introduction. These start broadly and then slowly narrow down to your specific research problem. It provides a nice narrative flow that provides the right information at the right time. If you stray from the CARS model, try to retain this same type of funneling.

Incorporate narrative element

People read research papers largely to be informed. But to inform the reader, you have to hold their attention. A narrative style, particularly in the introduction, is a great way to do that. This can be a compelling story, an intriguing question, or a description of a real-world problem.

Write the introduction last

By writing the introduction after the rest of the paper, you'll have a better idea of what your research entails and how the paper is structured. This prevents the common problem of writing something in the introduction and then forgetting to include it in the paper. It also means anything particularly exciting in the paper isn’t neglected in the intro.

Should you be using a customer insights hub?

Do you want to discover previous research faster?

Do you share your research findings with others?

Do you analyze research data?

Start for free today, add your research, and get to key insights faster

Editor’s picks

Last updated: 18 April 2023

Last updated: 27 February 2023

Last updated: 22 August 2024

Last updated: 5 February 2023

Last updated: 16 August 2024

Last updated: 9 March 2023

Last updated: 30 April 2024

Last updated: 12 December 2023

Last updated: 11 March 2024

Last updated: 4 July 2024

Last updated: 6 March 2024

Last updated: 5 March 2024

Last updated: 13 May 2024

Latest articles

Related topics, .css-je19u9{-webkit-align-items:flex-end;-webkit-box-align:flex-end;-ms-flex-align:flex-end;align-items:flex-end;display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-flex-direction:row;-ms-flex-direction:row;flex-direction:row;-webkit-box-flex-wrap:wrap;-webkit-flex-wrap:wrap;-ms-flex-wrap:wrap;flex-wrap:wrap;-webkit-box-pack:center;-ms-flex-pack:center;-webkit-justify-content:center;justify-content:center;row-gap:0;text-align:center;max-width:671px;}@media (max-width: 1079px){.css-je19u9{max-width:400px;}.css-je19u9>span{white-space:pre;}}@media (max-width: 799px){.css-je19u9{max-width:400px;}.css-je19u9>span{white-space:pre;}} decide what to .css-1kiodld{max-height:56px;display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-align-items:center;-webkit-box-align:center;-ms-flex-align:center;align-items:center;}@media (max-width: 1079px){.css-1kiodld{display:none;}} build next, decide what to build next, log in or sign up.

Get started for free

How to Write an Introduction for a Research Paper

How to write an introduction for a research paper? Eventually (and with practice) all writers will develop their own strategy for writing the perfect introduction for a research paper. Once you are comfortable with writing, you will probably find your own, but coming up with a good strategy can be tough for beginning writers.

The Purpose of an Introduction

Your opening paragraphs, phrases for introducing thesis statements, research paper introduction examples, using the introduction to map out your research paper.

Academic Writing, Editing, Proofreading, And Problem Solving Services

Get 10% off with 24start discount code.

• First write your thesis.Your thesis should state the main idea in specific terms.
• After you have a working thesis, tackle the body of your paper before you write the rest of the introduction. Each paragraph in the body should explore one specific topic that proves, or summarizes your thesis. Writing is a thinking process. Once you have worked your way through that process by writing the body of the paper, you will have an intimate understanding of how you are supporting your thesis. After you have written the body paragraphs, go back and rewrite your thesis to make it more specific and to connect it to the topics you addressed in the body paragraph.
• Revise your introduction several times, saving each revision. Be sure your introduction previews the topics you are presenting in your paper. One way of doing this is to use keywords from the topic sentences in each paragraph to introduce, or preview, the topics in your introduction.This “preview” will give your reader a context for understanding how you will make your case.
• Experiment by taking different approaches to your thesis with every revision you make. Play with the language in the introduction. Strike a new tone. Go back and compare versions. Then pick the one that works most effectively with the body of your research paper.
• Do not try to pack everything you want to say into your introduction. Just as your introduction should not be too short, it should also not be too long. Your introduction should be about the same length as any other paragraph in your research paper. Let the content—what you have to say—dictate the length.

The first page of your research paper should draw the reader into the text. It is the paper’s most important page and, alas, often the worst written. There are two culprits here and effective ways to cope with both of them.

First, the writer is usually straining too hard to say something terribly BIG and IMPORTANT about the thesis topic. The goal is worthy, but the aim is unrealistically high. The result is often a muddle of vague platitudes rather than a crisp, compelling introduction to the thesis. Want a familiar example? Listen to most graduation speakers. Their goal couldn’t be loftier: to say what education means and to tell an entire football stadium how to live the rest of their lives. The results are usually an avalanche of clichés and sodden prose.

The second culprit is bad timing. The opening and concluding paragraphs are usually written late in the game, after the rest of the thesis is finished and polished. There’s nothing wrong with writing these sections last. It’s usually the right approach since you need to know exactly what you are saying in the substantive middle sections of the thesis before you can introduce them effectively or draw together your findings. But having waited to write the opening and closing sections, you need to review and edit them several times to catch up. Otherwise, you’ll putting the most jagged prose in the most tender spots. Edit and polish your opening paragraphs with extra care. They should draw readers into the paper.

After you’ve done some extra polishing, I suggest a simple test for the introductory section. As an experiment, chop off the first few paragraphs. Let the paper begin on, say, paragraph 2 or even page 2. If you don’t lose much, or actually gain in clarity and pace, then you’ve got a problem.

There are two solutions. One is to start at this new spot, further into the text. After all, that’s where you finally gain traction on your subject. That works best in some cases, and we occasionally suggest it. The alternative, of course, is to write a new opening that doesn’t flop around, saying nothing.

What makes a good opening? Actually, they come in several flavors. One is an intriguing story about your topic. Another is a brief, compelling quote. When you run across them during your reading, set them aside for later use. Don’t be deterred from using them because they “don’t seem academic enough.” They’re fine as long as the rest of the paper doesn’t sound like you did your research in People magazine. The third, and most common, way to begin is by stating your main questions, followed by a brief comment about why they matter.

Whichever opening you choose, it should engage your readers and coax them to continue. Having done that, you should give them a general overview of the project—the main issues you will cover, the material you will use, and your thesis statement (that is, your basic approach to the topic). Finally, at the end of the introductory section, give your readers a brief road map, showing how the paper will unfold. How you do that depends on your topic but here are some general suggestions for phrase choice that may help:

• This analysis will provide …
• This paper analyzes the relationship between …
• This paper presents an analysis of …
• This paper will argue that …
• This topic supports the argument that…
• Research supports the opinion that …
• This paper supports the opinion that …
• An interpretation of the facts indicates …
• The results of this experiment show …
• The results of this research show …

Comparisons/Contrasts

• A comparison will show that …
• By contrasting the results,we see that …
• This paper examines the advantages and disadvantages of …

Definitions/Classifications

• This paper will provide a guide for categorizing the following:…
• This paper provides a definition of …
• This paper explores the meaning of …
• This paper will discuss the implications of …
• A discussion of this topic reveals …
• The following discussion will focus on …

Description

• This report describes…
• This report will illustrate…
• This paper provides an illustration of …

Process/Experimentation

• This paper will identify the reasons behind…
• The results of the experiment show …
• The process revealed that …
• This paper theorizes…
• This paper presents the theory that …
• In theory, this indicates that …

Quotes, anecdotes, questions, examples, and broad statements—all of them can used successfully to write an introduction for a research paper. It’s instructive to see them in action, in the hands of skilled academic writers.

Let’s begin with David M. Kennedy’s superb history, Freedom from Fear: The American People in Depression and War, 1929–1945 . Kennedy begins each chapter with a quote, followed by his text. The quote above chapter 1 shows President Hoover speaking in 1928 about America’s golden future. The text below it begins with the stock market collapse of 1929. It is a riveting account of just how wrong Hoover was. The text about the Depression is stronger because it contrasts so starkly with the optimistic quotation.

“We in America today are nearer the final triumph over poverty than ever before in the history of any land.”—Herbert Hoover, August 11, 1928 Like an earthquake, the stock market crash of October 1929 cracked startlingly across the United States, the herald of a crisis that was to shake the American way of life to its foundations. The events of the ensuing decade opened a fissure across the landscape of American history no less gaping than that opened by the volley on Lexington Common in April 1775 or by the bombardment of Sumter on another April four score and six years later. The ratcheting ticker machines in the autumn of 1929 did not merely record avalanching stock prices. In time they came also to symbolize the end of an era. (David M. Kennedy, Freedom from Fear: The American People in Depression and War, 1929–1945 . New York: Oxford University Press, 1999, p. 10)

Kennedy has exciting, wrenching material to work with. John Mueller faces the exact opposite problem. In Retreat from Doomsday: The Obsolescence of Major War , he is trying to explain why Great Powers have suddenly stopped fighting each other. For centuries they made war on each other with devastating regularity, killing millions in the process. But now, Mueller thinks, they have not just paused; they have stopped permanently. He is literally trying to explain why “nothing is happening now.” That may be an exciting topic intellectually, it may have great practical significance, but “nothing happened” is not a very promising subject for an exciting opening paragraph. Mueller manages to make it exciting and, at the same time, shows why it matters so much. Here’s his opening, aptly entitled “History’s Greatest Nonevent”:

On May 15, 1984, the major countries of the developed world had managed to remain at peace with each other for the longest continuous stretch of time since the days of the Roman Empire. If a significant battle in a war had been fought on that day, the press would have bristled with it. As usual, however, a landmark crossing in the history of peace caused no stir: the most prominent story in the New York Times that day concerned the saga of a manicurist, a machinist, and a cleaning woman who had just won a big Lotto contest. This book seeks to develop an explanation for what is probably the greatest nonevent in human history. (John Mueller, Retreat from Doomsday: The Obsolescence of Major War . New York: Basic Books, 1989, p. 3)

In the space of a few sentences, Mueller sets up his puzzle and reveals its profound human significance. At the same time, he shows just how easy it is to miss this milestone in the buzz of daily events. Notice how concretely he does that. He doesn’t just say that the New York Times ignored this record setting peace. He offers telling details about what they covered instead: “a manicurist, a machinist, and a cleaning woman who had just won a big Lotto contest.” Likewise, David Kennedy immediately entangles us in concrete events: the stunning stock market crash of 1929. These are powerful openings that capture readers’ interests, establish puzzles, and launch narratives.

Sociologist James Coleman begins in a completely different way, by posing the basic questions he will study. His ambitious book, Foundations of Social Theory , develops a comprehensive theory of social life, so it is entirely appropriate for him to begin with some major questions. But he could just as easily have begun with a compelling story or anecdote. He includes many of them elsewhere in his book. His choice for the opening, though, is to state his major themes plainly and frame them as a paradox. Sociologists, he says, are interested in aggregate behavior—how people act in groups, organizations, or large numbers—yet they mostly examine individuals:

A central problem in social science is that of accounting for the function of some kind of social system. Yet in most social research, observations are not made on the system as a whole, but on some part of it. In fact, the natural unit of observation is the individual person…  This has led to a widening gap between theory and research… (James S. Coleman, Foundations of Social Theory . Cambridge, MA: Harvard University Press, 1990, pp. 1–2)

After expanding on this point, Coleman explains that he will not try to remedy the problem by looking solely at groups or aggregate-level data. That’s a false solution, he says, because aggregates don’t act; individuals do. So the real problem is to show the links between individual actions and aggregate outcomes, between the micro and the macro.

The major problem for explanations of system behavior based on actions and orientations at a level below that of the system [in this case, on individual-level actions] is that of moving from the lower level to the system level. This has been called the micro-to-macro problem, and it is pervasive throughout the social sciences. (Coleman, Foundations of Social Theory , p. 6)

Explaining how to deal with this “micro-to-macro problem” is the central issue of Coleman’s book, and he announces it at the beginning.

Coleman’s theory-driven opening stands at the opposite end of the spectrum from engaging stories or anecdotes, which are designed to lure the reader into the narrative and ease the path to a more analytic treatment later in the text. Take, for example, the opening sentences of Robert L. Herbert’s sweeping study Impressionism: Art, Leisure, and Parisian Society : “When Henry Tuckerman came to Paris in 1867, one of the thousands of Americans attracted there by the huge international exposition, he was bowled over by the extraordinary changes since his previous visit twenty years before.” (Robert L. Herbert, Impressionism: Art, Leisure, and Parisian Society . New Haven, CT: Yale University Press, 1988, p. 1.) Herbert fills in the evocative details to set the stage for his analysis of the emerging Impressionist art movement and its connection to Parisian society and leisure in this period.

David Bromwich writes about Wordsworth, a poet so familiar to students of English literature that it is hard to see him afresh, before his great achievements, when he was just a young outsider starting to write. To draw us into Wordsworth’s early work, Bromwich wants us to set aside our entrenched images of the famous mature poet and see him as he was in the 1790s, as a beginning writer on the margins of society. He accomplishes this ambitious task in the opening sentences of Disowned by Memory: Wordsworth’s Poetry of the 1790s :

Wordsworth turned to poetry after the revolution to remind himself that he was still a human being. It was a curious solution, to a difficulty many would not have felt. The whole interest of his predicament is that he did feel it. Yet Wordsworth is now so established an eminence—his name so firmly fixed with readers as a moralist of self-trust emanating from complete self-security—that it may seem perverse to imagine him as a criminal seeking expiation. Still, that is a picture we get from The Borderers and, at a longer distance, from “Tintern Abbey.” (David Bromwich, Disowned by Memory: Wordsworth’s Poetry of the 1790s . Chicago: University of Chicago Press, 1998, p. 1)

That’s a wonderful opening! Look at how much Bromwich accomplishes in just a few words. He not only prepares the way for analyzing Wordsworth’s early poetry; he juxtaposes the anguished young man who wrote it to the self-confident, distinguished figure he became—the eminent man we can’t help remembering as we read his early poetry.

Let us highlight a couple of other points in this passage because they illustrate some intelligent writing choices. First, look at the odd comma in this sentence: “It was a curious solution, to a difficulty many would not have felt.” Any standard grammar book would say that comma is wrong and should be omitted. Why did Bromwich insert it? Because he’s a fine writer, thinking of his sentence rhythm and the point he wants to make. The comma does exactly what it should. It makes us pause, breaking the sentence into two parts, each with an interesting point. One is that Wordsworth felt a difficulty others would not have; the other is that he solved it in a distinctive way. It would be easy for readers to glide over this double message, so Bromwich has inserted a speed bump to slow us down. Most of the time, you should follow grammatical rules, like those about commas, but you should bend them when it serves a good purpose. That’s what the writer does here.

The second small point is the phrase “after the revolution” in the first sentence: “Wordsworth turned to poetry after the revolution to remind himself that he was still a human being.” Why doesn’t Bromwich say “after the French Revolution”? Because he has judged his book’s audience. He is writing for specialists who already know which revolution is reverberating through English life in the 1790s. It is the French Revolution, not the earlier loss of the American colonies. If Bromwich were writing for a much broader audience—say, the New York Times Book Review—he would probably insert the extra word to avoid confusion.

The message “Know your audience” applies to all writers. Don’t talk down to them by assuming they can’t get dressed in the morning. Don’t strut around showing off your book learnin’ by tossing in arcane facts and esoteric language for its own sake. Neither will win over readers.

Bromwich, Herbert, and Coleman open their works in different ways, but their choices work well for their different texts. Your task is to decide what kind of opening will work best for yours. Don’t let that happen by default, by grabbing the first idea you happen upon. Consider a couple of different ways of opening your thesis and then choose the one you prefer. Give yourself some options, think them over, then make an informed choice.

Whether you begin with a story, puzzle, or broad statement, the next part of the introduction should pose your main questions and establish your argument. This is your thesis statement—your viewpoint along with the supporting reasons and evidence. It should be articulated plainly so readers understand full well what your paper is about and what it will argue.

After that, give your readers a road map of what’s to come. That’s normally done at the end of the introductory section (or, in a book, at the end of the introductory chapter). Here’s John J. Mearsheimer presenting such a road map in The Tragedy of Great Power Politics . He not only tells us the order of upcoming chapters, he explains why he’s chosen that order and which chapters are most important:

The Plan of the Book The rest of the chapters in this book are concerned mainly with answering the six big questions about power which I identified earlier. Chapter 2, which is probably the most important chapter in the book, lays out my theory of why states compete for power and why they pursue hegemony. In Chapters 3 and 4, I define power and explain how to measure it. I do this in order to lay the groundwork for testing my theory… (John J. Mearsheimer, The Tragedy of Great Power Politics . New York: W. W. Norton, 2001, p. 27)

As this excerpt makes clear, Mearsheimer has already laid out his “six big questions” in the introduction. Now he’s showing us the path ahead, the path to answering those questions.

At the end of the introduction, give your readers a road map of what’s to come. Tell them what the upcoming sections will be and why they are arranged in this particular order.

After having written your introduction it’s time to move to the biggest part: body of a research paper.

Back to How To Write A Research Paper .

ORDER HIGH QUALITY CUSTOM PAPER

Reference management. Clean and simple.

How to write a good thesis introduction

1. Identify your readership

2. hook the reader and grab their attention, 3. provide relevant background, 4. give the reader a sense of what the paper is about, 5. preview key points and lead into your thesis statement, frequently asked questions about writing a good thesis introduction, related articles.

Many people struggle to write a thesis introduction. Much of your research prep should be done and you should be ready to start your introduction. But often, it’s not clear what needs to be included in a thesis introduction. If you feel stuck at this point not knowing how to start, this guide can help.

Tip: If you’re really struggling to write your thesis intro, consider putting in a placeholder until you write more of the body of your thesis. Then, come back to your intro once you have a stronger sense of the overall content of your thesis.

A good introduction draws readers in while providing the setup for the entire project. There is no single way to write an introduction that will always work for every topic , but the points below can act as a guide. These points can help you write a good thesis introduction.

Before even starting with your first sentence, consider who your readers are. Most likely, your readers will be the professors who are advising you on your thesis.

You should also consider readers of your thesis who are not specialists in your field. Writing with them in your mind will help you to be as clear as possible; this will make your thesis more understandable and enjoyable overall.

Tip: Always strive to be clear, correct, concrete, and concise in your writing.

The first sentence of the thesis is crucial. Looking back at your own research, think about how other writers may have hooked you.

It is common to start with a question or quotation, but these types of hooks are often overused. The best way to start your introduction is with a sentence that is broad and interesting and that seamlessly transitions into your argument.

Once again, consider your audience and how much background information they need to understand your approach. You can start by making a list of what is interesting about your topic:

• Are there any current events or controversies associated with your topic that might be interesting for your introduction?
• What kinds of background information might be useful for a reader to understand right away?
• Are there historical anecdotes or other situations that uniquely illustrate an important aspect of your argument?

A good introduction also needs to contain enough background information to allow the reader to understand the thesis statement and arguments. The amount of background information required will depend on the topic .

There should be enough background information so you don't have to spend too much time with it in the body of the thesis, but not so much that it becomes uninteresting.

Tip: Strike a balance between background information that is too broad or too specific.

Let the reader know what the purpose of the study is. Make sure to include the following points:

• Briefly describe the motivation behind your research.
• Describe the topic and scope of your research.
• Explain the practical relevance of your research.
• Explain the scholarly consensus related to your topic: briefly explain the most important articles and how they are related to your research.

At the end of your introduction, you should lead into your thesis statement by briefly bringing up a few of your main supporting details and by previewing what will be covered in the main part of the thesis. You’ll want to highlight the overall structure of your thesis so that readers will have a sense of what they will encounter as they read.

A good introduction draws readers in while providing the setup for the entire project. There is no single way to write an introduction that will always work for every topic, but these tips will help you write a great introduction:

• Identify your readership.
• Grab the reader's attention.
• Provide relevant background.
• Preview key points and lead into the thesis statement.

A good introduction needs to contain enough background information, and let the reader know what the purpose of the study is. Make sure to include the following points:

• Briefly describe the motivation for your research.

The length of the introduction will depend on the length of the whole thesis. Usually, an introduction makes up roughly 10 per cent of the total word count.

The best way to start your introduction is with a sentence that is broad and interesting and that seamlessly transitions into your argument. Consider the audience, then think of something that would grab their attention.

In Open Access: Theses and Dissertations you can find thousands of recent works. Take a look at any of the theses or dissertations for real-life examples of introductions that were already approved.

• If you are writing in a new discipline, you should always make sure to ask about conventions and expectations for introductions, just as you would for any other aspect of the essay. For example, while it may be acceptable to write a two-paragraph (or longer) introduction for your papers in some courses, instructors in other disciplines, such as those in some Government courses, may expect a shorter introduction that includes a preview of the argument that will follow.  
• In some disciplines (Government, Economics, and others), it’s common to offer an overview in the introduction of what points you will make in your essay. In other disciplines, you will not be expected to provide this overview in your introduction.  
• Avoid writing a very general opening sentence. While it may be true that “Since the dawn of time, people have been telling love stories,” it won’t help you explain what’s interesting about your topic.  
• Avoid writing a “funnel” introduction in which you begin with a very broad statement about a topic and move to a narrow statement about that topic. Broad generalizations about a topic will not add to your readers’ understanding of your specific essay topic.  
• Avoid beginning with a dictionary definition of a term or concept you will be writing about. If the concept is complicated or unfamiliar to your readers, you will need to define it in detail later in your essay. If it’s not complicated, you can assume your readers already know the definition.  
• Avoid offering too much detail in your introduction that a reader could better understand later in the paper.
• picture_as_pdf Introductions

• PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
• EDIT Edit this Article
• EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Happiness Hub Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
• Browse Articles
• Learn Something New
• Quizzes Hot
• Happiness Hub
• This Or That Game
• Train Your Brain
• Explore More
• Support wikiHow
• About wikiHow
• Log in / Sign up
• Education and Communications
• College University and Postgraduate
• Academic Writing
• Research Papers

How to Write a Research Introduction

Last Updated: December 6, 2023 Fact Checked

This article was co-authored by Megan Morgan, PhD . Megan Morgan is a Graduate Program Academic Advisor in the School of Public & International Affairs at the University of Georgia. She earned her PhD in English from the University of Georgia in 2015. There are 7 references cited in this article, which can be found at the bottom of the page. This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources. This article has been viewed 2,657,443 times.

The introduction to a research paper can be the most challenging part of the paper to write. The length of the introduction will vary depending on the type of research paper you are writing. An introduction should announce your topic, provide context and a rationale for your work, before stating your research questions and hypothesis. Well-written introductions set the tone for the paper, catch the reader's interest, and communicate the hypothesis or thesis statement.

Introducing the Topic of the Paper

• In scientific papers this is sometimes known as an "inverted triangle", where you start with the broadest material at the start, before zooming in on the specifics. [2] X Research source
• The sentence "Throughout the 20th century, our views of life on other planets have drastically changed" introduces a topic, but does so in broad terms.
• It provides the reader with an indication of the content of the essay and encourages them to read on.

• For example, if you were writing a paper about the behaviour of mice when exposed to a particular substance, you would include the word "mice", and the scientific name of the relevant compound in the first sentences.
• If you were writing a history paper about the impact of the First World War on gender relations in Britain, you should mention those key words in your first few lines.

• This is especially important if you are attempting to develop a new conceptualization that uses language and terminology your readers may be unfamiliar with.

• If you use an anecdote ensure that is short and highly relevant for your research. It has to function in the same way as an alternative opening, namely to announce the topic of your research paper to your reader.
• For example, if you were writing a sociology paper about re-offending rates among young offenders, you could include a brief story of one person whose story reflects and introduces your topic.
• This kind of approach is generally not appropriate for the introduction to a natural or physical sciences research paper where the writing conventions are different.

Establishing the Context for Your Paper

• It is important to be concise in the introduction, so provide an overview on recent developments in the primary research rather than a lengthy discussion.
• You can follow the "inverted triangle" principle to focus in from the broader themes to those to which you are making a direct contribution with your paper.
• A strong literature review presents important background information to your own research and indicates the importance of the field.

• By making clear reference to existing work you can demonstrate explicitly the specific contribution you are making to move the field forward.
• You can identify a gap in the existing scholarship and explain how you are addressing it and moving understanding forward.

• For example, if you are writing a scientific paper you could stress the merits of the experimental approach or models you have used.
• Stress what is novel in your research and the significance of your new approach, but don't give too much detail in the introduction.
• A stated rationale could be something like: "the study evaluates the previously unknown anti-inflammatory effects of a topical compound in order to evaluate its potential clinical uses".

Specifying Your Research Questions and Hypothesis

• The research question or questions generally come towards the end of the introduction, and should be concise and closely focused.
• The research question might recall some of the key words established in the first few sentences and the title of your paper.
• An example of a research question could be "what were the consequences of the North American Free Trade Agreement on the Mexican export economy?"
• This could be honed further to be specific by referring to a particular element of the Free Trade Agreement and the impact on a particular industry in Mexico, such as clothing manufacture.
• A good research question should shape a problem into a testable hypothesis.

• If possible try to avoid using the word "hypothesis" and rather make this implicit in your writing. This can make your writing appear less formulaic.
• In a scientific paper, giving a clear one-sentence overview of your results and their relation to your hypothesis makes the information clear and accessible. [10] X Trustworthy Source PubMed Central Journal archive from the U.S. National Institutes of Health Go to source
• An example of a hypothesis could be "mice deprived of food for the duration of the study were expected to become more lethargic than those fed normally".

• This is not always necessary and you should pay attention to the writing conventions in your discipline.
• In a natural sciences paper, for example, there is a fairly rigid structure which you will be following.
• A humanities or social science paper will most likely present more opportunities to deviate in how you structure your paper.

Research Introduction Help

Community Q&A

• Use your research papers' outline to help you decide what information to include when writing an introduction. Thanks Helpful 0 Not Helpful 1
• Consider drafting your introduction after you have already completed the rest of your research paper. Writing introductions last can help ensure that you don't leave out any major points. Thanks Helpful 0 Not Helpful 0

• Avoid emotional or sensational introductions; these can create distrust in the reader. Thanks Helpful 51 Not Helpful 12
• Generally avoid using personal pronouns in your introduction, such as "I," "me," "we," "us," "my," "mine," or "our." Thanks Helpful 32 Not Helpful 7
• Don't overwhelm the reader with an over-abundance of information. Keep the introduction as concise as possible by saving specific details for the body of your paper. Thanks Helpful 25 Not Helpful 14

You Might Also Like

• ↑ https://library.sacredheart.edu/c.php?g=29803&p=185916
• ↑ https://www.aresearchguide.com/inverted-pyramid-structure-in-writing.html
• ↑ https://libguides.usc.edu/writingguide/introduction
• ↑ https://writing.wisc.edu/Handbook/PlanResearchPaper.html
• ↑ https://dept.writing.wisc.edu/wac/writing-an-introduction-for-a-scientific-paper/
• ↑ https://writing.wisc.edu/handbook/assignments/planresearchpaper/
• ↑ http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3178846/

About This Article

To introduce your research paper, use the first 1-2 sentences to describe your general topic, such as “women in World War I.” Include and define keywords, such as “gender relations,” to show your reader where you’re going. Mention previous research into the topic with a phrase like, “Others have studied…”, then transition into what your contribution will be and why it’s necessary. Finally, state the questions that your paper will address and propose your “answer” to them as your thesis statement. For more information from our English Ph.D. co-author about how to craft a strong hypothesis and thesis, keep reading! Did this summary help you? Yes No

• Send fan mail to authors

Reader Success Stories

Abdulrahman Omar

Oct 5, 2018

Did this article help you?

May 9, 2021

Lavanya Gopakumar

Oct 1, 2016

Dengkai Zhang

May 14, 2018

Leslie Mae Cansana

Sep 22, 2016

Featured Articles

Trending Articles

Watch Articles

• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

Get all the best how-tos!

Sign up for wikiHow's weekly email newsletter

• Langson Library
• Science Library
• Grunigen Medical Library
• Law Library
• Connect From Off-Campus
• Accessibility
• Gateway Study Center

Email this link

Writing a scientific paper.

• Writing a lab report

What is a "good" introduction?

Citing sources in the introduction, "introduction checklist" from: how to write a good scientific paper. chris a. mack. spie. 2018..

• LITERATURE CITED
• Bibliography of guides to scientific writing and presenting
• Peer Review
• Presentations
• Lab Report Writing Guides on the Web

This is where you describe briefly and clearly why you are writing the paper. The introduction supplies sufficient background information for the reader to understand and evaluate the experiment you did. It also supplies a rationale for the study.

• Present the problem and the proposed solution
• Presents nature and scope of the problem investigated
• Reviews the pertinent literature to orient the reader
• States the method of the experiment
• State the principle results of the experiment

It is important to cite sources in the introduction section of your paper as evidence of the claims you are making. There are ways of citing sources in the text so that the reader can find the full reference in the literature cited section at the end of the paper, yet the flow of the reading is not badly interrupted. Below are some example of how this can be done:     "Smith (1983) found that N-fixing plants could be infected by several different species of Rhizobium."     "Walnut trees are known to be allelopathic (Smith 1949,  Bond et al. 1955, Jones and Green 1963)."     "Although the presence of Rhizobium normally increases the growth of legumes (Nguyen 1987), the opposite effect has been observed (Washington 1999)." Note that articles by one or two authors are always cited in the text using their last names. However, if there are more than two authors, the last name of the 1st author is given followed by the abbreviation et al. which is Latin for "and others". 

From:  https://writingcenter.gmu.edu/guides/imrad-reports-introductions

• Indicate the field of the work, why this field is important, and what has already been done (with proper citations).
• Indicate a gap, raise a research question, or challenge prior work in this territory.
• Outline the purpose and announce the present research, clearly indicating what is novel and why it is significant.
• Avoid: repeating the abstract; providing unnecessary background information; exaggerating the importance of the work; claiming novelty without a proper literature search. 
• << Previous: ABSTRACT
• Next: METHODS >>
• Last Updated: Aug 4, 2023 9:33 AM
• URL: https://guides.lib.uci.edu/scientificwriting

Off-campus? Please use the Software VPN and choose the group UCIFull to access licensed content. For more information, please Click here

Software VPN is not available for guests, so they may not have access to some content when connecting from off-campus.

We use cookies to give you the best experience possible. By continuing we’ll assume you’re on board with our cookie policy

• A Research Guide
• Research Paper Guide

How to Write an Introduction for a Research Paper

• Purpose of intro
• Key elements
• Writing an effective intro
• Step-by-step guide
• Research intro checklist
• Introduction formats
• Good and bad examples

An introductory paragraph is vital for any academic paper. It allows you to show reviewers why your research topic is worth reading about. In this article, we will explore the tips to make a good introduction paragraph. You’ll get a step-by-step tutorial on writing your paper’s informative yet laconic intro.

What is the purpose of an introduction?

The purpose of a research paper intro is to provide an overview and context for the study being conducted. A research paper engages the reader, establishes the importance of the research topic, and outlines the study’s objectives and scope.

The paper intro also presents the question or hypothesis and summarizes relevant background characteristics and existing literature.

An effective introduction helps the reader understand the significance and relevance of the research paper and sets the stage for the subsequent sections. The introduction captures the reader’s attention and creates a foundation for understanding the research and its contributions.

The key elements of a scientific paper introduction

The introduction of your research paper should include several key elements, including the problem statement, hypothesis/thesis/research question, purpose, and background.

Let’s explore each of these parts of the research paper intro in detail:

• Problem Statement : identifies the specific issue or gap in knowledge that the research paper aims to address. It highlights the problem’s relevance, significance, and potential impact on the field of study. The problem statement sets the stage for the research by clearly stating the project or research gap.
• Hypothesis / Thesis / Research Question : a paper hypothesis predicts the relationship between variables, a thesis statement presents the main argument or claim, and a research question seeks to put a specific aspect on a research paper.
• Purpose: describes the overall objective or goal the research paper aims to achieve. It outlines the researcher’s intention and provides a clear direction for the investigation. The purpose statement typically explains why the research is being conducted and what the researcher hopes to accomplish by the end of the study.
• Background : provides the necessary context and information to familiarize readers with the research paper. It presents a concise review of the relevant literature, previous studies, and theoretical frameworks that have shaped the understanding of the problem.

Shortly, the introduction section of a research paper combines these key elements to introduce the problem, state the hypothesis/thesis/research question, define the paper’s purpose, and provide the background necessary for readers to understand the significance and context of the study.

How to write an effective intro?

To start an introduction for a research paper, consider the following steps:

• Hook the reader : begin with a compelling opening sentence or a thought-provoking statement that grabs the reader’s attention. This could be an interesting fact, a relevant anecdote, or a surprising statistic related to your research paper.
• Provide background information : offer a brief overview of the paper and its significance in the field. This helps to improve the structure of an introduction and demonstrate why it is important to investigate the point further in a paper.
• State the problem : clearly articulate the problem statement or research gap your study aims to address. Explain the specific issue or gap in knowledge that your research paper seeks to explore, emphasizing its relevance and potential impact.
• Present the research question/hypothesis/thesis : formulate a concise and focused research question, hypothesis, or thesis statement in the intro that guides your scientific paper. This sets the direction for your research and provides a clear focus for the reader.
• Outline the purpose and objectives : explain the overall purpose of your research paper and the specific objectives you aim to achieve. This helps readers understand why your study is being conducted and what you hope to accomplish.
• Preview the structure : briefly introduce the organization and structure of your research paper. Mention the main sections or components that will be covered, giving readers a sense of what to expect as they continue reading the paper.

Remember, the intro should be concise and engaging, providing a clear roadmap for your research and capturing the reader’s interest from the very beginning. There are different ways to start a research paper, and you can pick the intro that suits you best.

Writing an introduction to a research paper: key steps

Here’s a short guide on getting you started with an introduction:

• Start with an attention-grabbing opening : begin your intro with a captivating statement, a relevant quote, a surprising fact, or an intriguing anecdote. This will engage the reader’s interest and make them curious about your research paper.
• Provide background information : write a brief overview of the research topic to provide context and establish the importance of the subject matter. Discuss key concepts, definitions, or historical background relevant to your study. This section should help the reader understand the broader context of your research paper.
• State the research problem or gap : clearly define the specific problem or research gap your study aims to address. Explain why this problem is significant and deserving of investigation. This helps the reader understand the purpose and relevance of your research paper.
• Present your research question or thesis statement : formulate a clear and concise research question, hypothesis, or thesis statement that serves as the central focus of your study. This statement should guide your research paper and articulate your introduction format.
• Outline the structure of the paper : write a brief preview of your research paper’s main sections and organization. This helps the reader understand the flow of your paper and what to expect in each section. Provide a roadmap by mentioning the key points or arguments discussed in subsequent sections.

By following these steps, you can create an introduction that grabs the reader’s attention and sets the stage for the rest of your research paper, clearly understanding your study’s problem, purpose, and structure.

Writing a checklist for a proper college paper introduction

Here’s a short writing checklist for a research paper intro:

• Attention-grabbing opening:
• Does the research paper introduction example start with a compelling statement, relevant quote, surprising fact, or intriguing anecdote?
• Is the opening engaging enough to capture readers’ attention and make them curious about the research paper?
• Background information:
• Have you provided a concise overview of the research topic, including relevant definitions, concepts, or historical context?
• Does the background information help the reader understand the broader context and importance of the subject matter?
• Clear problem statement:
• Have you clearly stated the specific problem or research gap that your study aims to address?
• Does a research introduction have a well-defined, strong, and significant problem statement?
• Research question or thesis statement:
• Have you presented a clear and concise research question, hypothesis, or thesis statement that guides your paper?
• Does the research question or thesis statement align with the problem statement and set the direction for your research paper?
• Structure and organization:
• Did you write a brief overview of the structure and organization of the research paper?
• Does the introduction outline the main sections or components covered in the paper?
• Coherence and flow:
• Is the intro logically organized? Does it have smooth transitions between ideas and paragraphs?
• Does the intro flow smoothly from the opening to the problem statement, research question, and purpose?
• Conciseness and clarity:
• Have you kept the introduction concise, avoiding unnecessary details or tangents?
• Is the language clear, avoiding jargon or overly technical terms that may confuse the reader?
• Relevance and significance:
• Have you clearly explained the relevance and significance of the research topic and the paper’s potential impact?
• Does the introduction effectively communicate why your research is important and worth exploring?

This checklist will help you to review your research essay introduction to ensure it effectively grabs the reader’s attention, provides necessary background information, states the problem clearly, presents a focused research question or thesis statement, outlines the structure of the paper, and maintains coherence and clarity throughout.

Types of intro formats

Different academic disciplines may follow specific formatting styles for research introduction, such as MLA (Modern Language Association), APA (American Psychological Association), Chicago, ASA (American Sociological Association), and AMA (American Medical Association).

To write an introduction paragraph, you should understand the differences between the most common academic formats for your future paper.

MLA (Modern Language Association):

• Primarily used in humanities, literature, and arts disciplines.
• Features in-text citations using the author-page format (e.g., “Smith 45”).

APA (American Psychological Association):

• Commonly used in social sciences, psychology, and education.
• Utilizes in-text citations with the author-date format (e.g., “Smith, 2019”).
• Often used in history, humanities, and some social sciences.
• Offers two styles: the notes-bibliography system and the author-date system.
• Includes a bibliography page to list all sources used.

ASA (American Sociological Association):

• Primarily used in sociology and related social sciences.
• Utilizes in-text citations with the author-date format (e.g., “Smith 2019”).

AMA (American Medical Association):

• Commonly used in medical, health, and biological sciences.
• Features in-text citations with a superscript number (e.g., “Smith^1”).
• Emphasizes accuracy and consistency in citation style.

All formatting styles mean a set of rules and guidelines for citing sources, formatting headings, page layout, and referencing. It’s important to consult the specific style guide or manual associated with your field of study before you write.

These might include guidelines provided by your institution to ensure proper paper formatting and adherence of a research introduction to the chosen style.

Research introduction sample

Now that you know how the idea goes in the introduction of a research paper, let’s see the practical examples of good and bad introductions and discuss their differences.

Good example:

Title: “Exploring the Impact of Climate Change on Biodiversity: A Comprehensive Analysis”

Introduction:

Climate change is a pressing global issue that has far-reaching consequences for our planet. Its effects on various ecosystems, particularly biodiversity loss, have attracted significant attention from researchers and policymakers alike.

This research paper aims to provide a comprehensive analysis of the impact of climate change on biodiversity, focusing on key regions and species vulnerable to these changes. By examining the latest scientific literature, empirical studies, and expert opinions, we will explore the complex interplay between climate change and biodiversity loss, shed light on the underlying mechanisms, and propose potential mitigation strategies.

Understanding these dynamics is crucial for developing effective conservation strategies and promoting sustainable practices that will help preserve our planet’s invaluable natural heritage.

Bad example:

Title: “Climate Change and Biodiversity”

Climate change and biodiversity are two important topics that have received considerable attention recently. Climate change refers to the long-term alteration of temperature and precipitation patterns, while biodiversity encompasses the variety of life forms found on Earth.

In this research paper, we will discuss the impact of climate change on biodiversity and explore various examples and case studies. The paper will also highlight the significance of addressing this issue and present potential solutions.

By delving into this subject, we aim to contribute to the existing body of knowledge and raise awareness about the importance of protecting biodiversity in climate change.

To begin an introduction paragraph, don’t provide too much background or theory at once. Remember to arrange your thoughts concisely while keeping the important information for the paper body.

A good intro should answer the four basic questions:

• What was I studying?
• Why was this topic important to investigate?
• What did we know about this topic before I did this study?
• How will this study advance our knowledge?

Remember that you might not get a second chance to create a positive first impression. That’s why it’s equally important to keep your paper laconic and to end an introduction paragraph with a call to action to read your research paper.

• Writing a Research Paper
• Research Paper Title
• Research Paper Sources
• Research Paper Problem Statement
• Research Paper Thesis Statement
• Hypothesis for a Research Paper
• Research Question
• Research Paper Outline
• Research Paper Summary
• Research Paper Prospectus
• Research Paper Proposal
• Research Paper Format
• Research Paper Styles
• AMA Style Research Paper
• MLA Style Research Paper
• Chicago Style Research Paper
• APA Style Research Paper
• Research Paper Structure
• Research Paper Cover Page
• Research Paper Abstract
• Research Paper Introduction
• Research Paper Body Paragraph
• Research Paper Literature Review
• Research Paper Background
• Research Paper Methods Section
• Research Paper Results Section
• Research Paper Discussion Section
• Research Paper Conclusion
• Research Paper Appendix
• Research Paper Bibliography
• APA Reference Page
• Annotated Bibliography
• Bibliography vs Works Cited vs References Page
• Research Paper Types
• What is Qualitative Research

Receive paper in 3 Hours!

• Choose the number of pages.
• Select your deadline.
• Complete your order.

Number of Pages

550 words (double spaced)

Deadline: 10 days left

By clicking "Log In", you agree to our terms of service and privacy policy . We'll occasionally send you account related and promo emails.

Sign Up for your FREE account

How to Write the Introduction to a Scientific Paper?

• Open Access
• First Online: 24 October 2021

Cite this chapter

You have full access to this open access chapter

• Samiran Nundy 4 ,
• Atul Kakar 5 &
• Zulfiqar A. Bhutta 6  

72k Accesses

142 Altmetric

An Introduction to a scientific paper familiarizes the reader with the background of the issue at hand. It must reflect why the issue is topical and its current importance in the vast sea of research being done globally. It lays the foundation of biomedical writing and is the first portion of an article according to the IMRAD pattern ( I ntroduction, M ethodology, R esults, a nd D iscussion) [1].

I once had a professor tell a class that he sifted through our pile of essays, glancing at the titles and introductions, looking for something that grabbed his attention. Everything else went to the bottom of the pile to be read last, when he was tired and probably grumpy from all the marking. Don’t get put at the bottom of the pile, he said. Anonymous

You have full access to this open access chapter,  Download chapter PDF

Similar content being viewed by others

The Introduction Section

Abstract and Keywords

Writing and publishing a scientific paper

1 what is the importance of an introduction.

An Introduction to a scientific paper familiarizes the reader with the background of the issue at hand. It must reflect why the issue is topical and its current importance in the vast sea of research being done globally. It lays the foundation of biomedical writing and is the first portion of an article according to the IMRAD pattern ( I ntroduction, M ethodology, R esults, a nd D iscussion) [ 1 ].

It provides the flavour of the article and many authors have used phrases to describe it for example—'like a gate of the city’ [ 2 ], ‘the beginning is half of the whole’ [ 3 ], ‘an introduction is not just wrestling with words to fit the facts, but it also strongly modulated by perception of the anticipated reactions of peer colleagues’, [ 4 ] and ‘an introduction is like the trailer to a movie’. A good introduction helps captivate the reader early.

2 What Are the Principles of Writing a Good Introduction?

A good introduction will ‘sell’ an article to a journal editor, reviewer, and finally to a reader [ 3 ]. It should contain the following information [ 5 , 6 ]:

The known—The background scientific data

The unknown—Gaps in the current knowledge

Research hypothesis or question

Methodologies used for the study

The known consist of citations from a review of the literature whereas the unknown is the new work to be undertaken. This part should address how your work is the required missing piece of the puzzle.

3 What Are the Models of Writing an Introduction?

The Problem-solving model

First described by Swales et al. in 1979, in this model the writer should identify the ‘problem’ in the research, address the ‘solution’ and also write about ‘the criteria for evaluating the problem’ [ 7 , 8 ].

The CARS model that stands for C reating A R esearch S pace [ 9 , 10 ].

The two important components of this model are:

Establishing a territory (situation)

Establishing a niche (problem)

Occupying a niche (the solution)

In this popular model, one can add a fourth point, i.e., a conclusion [ 10 ].

4 What Is Establishing a Territory?

This includes: [ 9 ]

Stating the general topic and providing some background about it.

Providing a brief and relevant review of the literature related to the topic.

Adding a paragraph on the scope of the topic including the need for your study.

5 What Is Establishing a Niche?

Establishing a niche includes:

Stating the importance of the problem.

Outlining the current situation regarding the problem citing both global and national data.

Evaluating the current situation (advantages/ disadvantages).

Identifying the gaps.

Emphasizing the importance of the proposed research and how the gaps will be addressed.

Stating the research problem/ questions.

Stating the hypotheses briefly.

Figure 17.1 depicts how the introduction needs to be written. A scientific paper should have an introduction in the form of an inverted pyramid. The writer should start with the general information about the topic and subsequently narrow it down to the specific topic-related introduction.

Flow of ideas from the general to the specific

6 What Does Occupying a Niche Mean?

This is the third portion of the introduction and defines the rationale of the research and states the research question. If this is missing the reviewers will not understand the logic for publication and is a common reason for rejection [ 11 , 12 ]. An example of this is given below:

Till date, no study has been done to see the effectiveness of a mesh alone or the effectiveness of double suturing along with a mesh in the closure of an umbilical hernia regarding the incidence of failure. So, the present study is aimed at comparing the effectiveness of a mesh alone versus the double suturing technique along with a mesh.

7 How Long Should the Introduction Be?

For a project protocol, the introduction should be about 1–2 pages long and for a thesis it should be 3–5 pages in a double-spaced typed setting. For a scientific paper it should be less than 10–15% of the total length of the manuscript [ 13 , 14 ].

8 How Many References Should an Introduction Have?

All sections in a scientific manuscript except the conclusion should contain references. It has been suggested that an introduction should have four or five or at the most one-third of the references in the whole paper [ 15 ].

9 What Are the Important Points Which Should be not Missed in an Introduction?

An introduction paves the way forward for the subsequent sections of the article. Frequently well-planned studies are rejected by journals during review because of the simple reason that the authors failed to clarify the data in this section to justify the study [ 16 , 17 ]. Thus, the existing gap in knowledge should be clearly brought out in this section (Fig. 17.2 ).

How should the abstract, introduction, and discussion look

The following points are important to consider:

The introduction should be written in simple sentences and in the present tense.

Many of the terms will be introduced in this section for the first time and these will require abbreviations to be used later.

The references in this section should be to papers published in quality journals (e.g., having a high impact factor).

The aims, problems, and hypotheses should be clearly mentioned.

Start with a generalization on the topic and go on to specific information relevant to your research.

10 Example of an Introduction

11 Conclusions

An Introduction is a brief account of what the study is about. It should be short, crisp, and complete.

It has to move from a general to a specific research topic and must include the need for the present study.

The Introduction should include data from a literature search, i.e., what is already known about this subject and progress to what we hope to add to this knowledge.

Moore A. What’s in a discussion section? Exploiting 2-dimensionality in the online world. Bioassays. 2016;38(12):1185.

Article   Google Scholar  

Annesley TM. The discussion section: your closing argument. Clin Chem. 2010;56(11):1671–4.

Article   CAS   Google Scholar  

Bavdekar SB. Writing the discussion section: describing the significance of the study findings. J Assoc Physicians India. 2015;63(11):40–2.

PubMed   Google Scholar  

Foote M. The proof of the pudding: how to report results and write a good discussion. Chest. 2009;135(3):866–8.

Kearney MH. The discussion section tells us where we are. Res Nurs Health. 2017;40(4):289–91.

Ghasemi A, Bahadoran Z, Mirmiran P, Hosseinpanah F, Shiva N, Zadeh-Vakili A. The principles of biomedical scientific writing: discussion. Int J Endocrinol Metab. 2019;17(3):e95415.

Swales JM, Feak CB. Academic writing for graduate students: essential tasks and skills. Ann Arbor, MI: University of Michigan Press; 2004.

Google Scholar  

Colombo M, Bucher L, Sprenger J. Determinants of judgments of explanatory power: credibility, generality, and statistical relevance. Front Psychol. 2017;8:1430.

Mozayan MR, Allami H, Fazilatfar AM. Metadiscourse features in medical research articles: subdisciplinary and paradigmatic influences in English and Persian. Res Appl Ling. 2018;9(1):83–104.

Hyland K. Metadiscourse: mapping interactions in academic writing. Nordic J English Stud. 2010;9(2):125.

Hill AB. The environment and disease: association or causation? Proc Royal Soc Med. 2016;58(5):295–300.

Alpert JS. Practicing medicine in Plato’s cave. Am J Med. 2006;119(6):455–6.

Walsh K. Discussing discursive discussions. Med Educ. 2016;50(12):1269–70.

Polit DF, Beck CT. Generalization in quantitative and qualitative research: myths and strategies. Int J Nurs Stud. 2010;47(11):1451–8.

Jawaid SA, Jawaid M. How to write introduction and discussion. Saudi J Anaesth. 2019;13(Suppl 1):S18–9.

Jawaid SA, Baig M. How to write an original article. In: Jawaid SA, Jawaid M, editors. Scientific writing: a guide to the art of medical writing and scientific publishing. Karachi: Published by Med-Print Services; 2018. p. 135–50.

Hall GM, editor. How to write a paper. London: BMJ Books, BMJ Publishing Group; 2003. Structure of a scientific paper. p. 1–5.

Download references

Author information

Authors and affiliations.

Department of Surgical Gastroenterology and Liver Transplantation, Sir Ganga Ram Hospital, New Delhi, India

Samiran Nundy

Department of Internal Medicine, Sir Ganga Ram Hospital, New Delhi, India

Institute for Global Health and Development, The Aga Khan University, South Central Asia, East Africa and United Kingdom, Karachi, Pakistan

Zulfiqar A. Bhutta

You can also search for this author in PubMed   Google Scholar

Rights and permissions

Open Access This chapter is licensed under the terms of the Creative Commons Attribution 4.0 International License ( http://creativecommons.org/licenses/by/4.0/ ), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

Reprints and permissions

Copyright information

© 2022 The Author(s)

About this chapter

Nundy, S., Kakar, A., Bhutta, Z.A. (2022). How to Write the Introduction to a Scientific Paper?. In: How to Practice Academic Medicine and Publish from Developing Countries?. Springer, Singapore. https://doi.org/10.1007/978-981-16-5248-6_17

Download citation

DOI : https://doi.org/10.1007/978-981-16-5248-6_17

Published : 24 October 2021

Publisher Name : Springer, Singapore

Print ISBN : 978-981-16-5247-9

Online ISBN : 978-981-16-5248-6

eBook Packages : Medicine Medicine (R0)

Share this chapter

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Publish with us

Policies and ethics

• Find a journal
• Track your research

Starting Your Research Paper: Writing an Introductory Paragraph

• Choosing Your Topic
• Define Keywords
• Planning Your Paper
• Writing an Introductory Paragraph

The Dreaded Introductory Paragraph

Writing the introductory paragraph can be a frustrating and slow process -- but it doesn't have to be.  If you planned your paper out, then most of the introductory paragraph is already written.  Now you just need a beginning and an end.

Here's an introductory paragraph for a paper I wrote.  I started the paper with a factoid, then presented each main point of my paper and then ended with my thesis statement.

  Breakdown:

• << Previous: Planning Your Paper
• Last Updated: Feb 12, 2024 12:16 PM
• URL: https://libguides.astate.edu/papers

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• Yale J Biol Med
• v.84(3); 2011 Sep

Focus: Education — Career Advice

How to write your first research paper.

Writing a research manuscript is an intimidating process for many novice writers in the sciences. One of the stumbling blocks is the beginning of the process and creating the first draft. This paper presents guidelines on how to initiate the writing process and draft each section of a research manuscript. The paper discusses seven rules that allow the writer to prepare a well-structured and comprehensive manuscript for a publication submission. In addition, the author lists different strategies for successful revision. Each of those strategies represents a step in the revision process and should help the writer improve the quality of the manuscript. The paper could be considered a brief manual for publication.

It is late at night. You have been struggling with your project for a year. You generated an enormous amount of interesting data. Your pipette feels like an extension of your hand, and running western blots has become part of your daily routine, similar to brushing your teeth. Your colleagues think you are ready to write a paper, and your lab mates tease you about your “slow” writing progress. Yet days pass, and you cannot force yourself to sit down to write. You have not written anything for a while (lab reports do not count), and you feel you have lost your stamina. How does the writing process work? How can you fit your writing into a daily schedule packed with experiments? What section should you start with? What distinguishes a good research paper from a bad one? How should you revise your paper? These and many other questions buzz in your head and keep you stressed. As a result, you procrastinate. In this paper, I will discuss the issues related to the writing process of a scientific paper. Specifically, I will focus on the best approaches to start a scientific paper, tips for writing each section, and the best revision strategies.

1. Schedule your writing time in Outlook

Whether you have written 100 papers or you are struggling with your first, starting the process is the most difficult part unless you have a rigid writing schedule. Writing is hard. It is a very difficult process of intense concentration and brain work. As stated in Hayes’ framework for the study of writing: “It is a generative activity requiring motivation, and it is an intellectual activity requiring cognitive processes and memory” [ 1 ]. In his book How to Write a Lot: A Practical Guide to Productive Academic Writing , Paul Silvia says that for some, “it’s easier to embalm the dead than to write an article about it” [ 2 ]. Just as with any type of hard work, you will not succeed unless you practice regularly. If you have not done physical exercises for a year, only regular workouts can get you into good shape again. The same kind of regular exercises, or I call them “writing sessions,” are required to be a productive author. Choose from 1- to 2-hour blocks in your daily work schedule and consider them as non-cancellable appointments. When figuring out which blocks of time will be set for writing, you should select the time that works best for this type of work. For many people, mornings are more productive. One Yale University graduate student spent a semester writing from 8 a.m. to 9 a.m. when her lab was empty. At the end of the semester, she was amazed at how much she accomplished without even interrupting her regular lab hours. In addition, doing the hardest task first thing in the morning contributes to the sense of accomplishment during the rest of the day. This positive feeling spills over into our work and life and has a very positive effect on our overall attitude.

Rule 1: Create regular time blocks for writing as appointments in your calendar and keep these appointments.

2. start with an outline.

Now that you have scheduled time, you need to decide how to start writing. The best strategy is to start with an outline. This will not be an outline that you are used to, with Roman numerals for each section and neat parallel listing of topic sentences and supporting points. This outline will be similar to a template for your paper. Initially, the outline will form a structure for your paper; it will help generate ideas and formulate hypotheses. Following the advice of George M. Whitesides, “. . . start with a blank piece of paper, and write down, in any order, all important ideas that occur to you concerning the paper” [ 3 ]. Use Table 1 as a starting point for your outline. Include your visuals (figures, tables, formulas, equations, and algorithms), and list your findings. These will constitute the first level of your outline, which will eventually expand as you elaborate.

The next stage is to add context and structure. Here you will group all your ideas into sections: Introduction, Methods, Results, and Discussion/Conclusion ( Table 2 ). This step will help add coherence to your work and sift your ideas.

Now that you have expanded your outline, you are ready for the next step: discussing the ideas for your paper with your colleagues and mentor. Many universities have a writing center where graduate students can schedule individual consultations and receive assistance with their paper drafts. Getting feedback during early stages of your draft can save a lot of time. Talking through ideas allows people to conceptualize and organize thoughts to find their direction without wasting time on unnecessary writing. Outlining is the most effective way of communicating your ideas and exchanging thoughts. Moreover, it is also the best stage to decide to which publication you will submit the paper. Many people come up with three choices and discuss them with their mentors and colleagues. Having a list of journal priorities can help you quickly resubmit your paper if your paper is rejected.

Rule 2: Create a detailed outline and discuss it with your mentor and peers.

3. continue with drafts.

After you get enough feedback and decide on the journal you will submit to, the process of real writing begins. Copy your outline into a separate file and expand on each of the points, adding data and elaborating on the details. When you create the first draft, do not succumb to the temptation of editing. Do not slow down to choose a better word or better phrase; do not halt to improve your sentence structure. Pour your ideas into the paper and leave revision and editing for later. As Paul Silvia explains, “Revising while you generate text is like drinking decaffeinated coffee in the early morning: noble idea, wrong time” [ 2 ].

Many students complain that they are not productive writers because they experience writer’s block. Staring at an empty screen is frustrating, but your screen is not really empty: You have a template of your article, and all you need to do is fill in the blanks. Indeed, writer’s block is a logical fallacy for a scientist ― it is just an excuse to procrastinate. When scientists start writing a research paper, they already have their files with data, lab notes with materials and experimental designs, some visuals, and tables with results. All they need to do is scrutinize these pieces and put them together into a comprehensive paper.

3.1. Starting with Materials and Methods

If you still struggle with starting a paper, then write the Materials and Methods section first. Since you have all your notes, it should not be problematic for you to describe the experimental design and procedures. Your most important goal in this section is to be as explicit as possible by providing enough detail and references. In the end, the purpose of this section is to allow other researchers to evaluate and repeat your work. So do not run into the same problems as the writers of the sentences in (1):

1a. Bacteria were pelleted by centrifugation. 1b. To isolate T cells, lymph nodes were collected.

As you can see, crucial pieces of information are missing: the speed of centrifuging your bacteria, the time, and the temperature in (1a); the source of lymph nodes for collection in (b). The sentences can be improved when information is added, as in (2a) and (2b), respectfully:

2a. Bacteria were pelleted by centrifugation at 3000g for 15 min at 25°C. 2b. To isolate T cells, mediastinal and mesenteric lymph nodes from Balb/c mice were collected at day 7 after immunization with ovabumin.

If your method has previously been published and is well-known, then you should provide only the literature reference, as in (3a). If your method is unpublished, then you need to make sure you provide all essential details, as in (3b).

3a. Stem cells were isolated, according to Johnson [23]. 3b. Stem cells were isolated using biotinylated carbon nanotubes coated with anti-CD34 antibodies.

Furthermore, cohesion and fluency are crucial in this section. One of the malpractices resulting in disrupted fluency is switching from passive voice to active and vice versa within the same paragraph, as shown in (4). This switching misleads and distracts the reader.

4. Behavioral computer-based experiments of Study 1 were programmed by using E-Prime. We took ratings of enjoyment, mood, and arousal as the patients listened to preferred pleasant music and unpreferred music by using Visual Analogue Scales (SI Methods). The preferred and unpreferred status of the music was operationalized along a continuum of pleasantness [ 4 ].

The problem with (4) is that the reader has to switch from the point of view of the experiment (passive voice) to the point of view of the experimenter (active voice). This switch causes confusion about the performer of the actions in the first and the third sentences. To improve the coherence and fluency of the paragraph above, you should be consistent in choosing the point of view: first person “we” or passive voice [ 5 ]. Let’s consider two revised examples in (5).

5a. We programmed behavioral computer-based experiments of Study 1 by using E-Prime. We took ratings of enjoyment, mood, and arousal by using Visual Analogue Scales (SI Methods) as the patients listened to preferred pleasant music and unpreferred music. We operationalized the preferred and unpreferred status of the music along a continuum of pleasantness. 5b. Behavioral computer-based experiments of Study 1 were programmed by using E-Prime. Ratings of enjoyment, mood, and arousal were taken as the patients listened to preferred pleasant music and unpreferred music by using Visual Analogue Scales (SI Methods). The preferred and unpreferred status of the music was operationalized along a continuum of pleasantness.

If you choose the point of view of the experimenter, then you may end up with repetitive “we did this” sentences. For many readers, paragraphs with sentences all beginning with “we” may also sound disruptive. So if you choose active sentences, you need to keep the number of “we” subjects to a minimum and vary the beginnings of the sentences [ 6 ].

Interestingly, recent studies have reported that the Materials and Methods section is the only section in research papers in which passive voice predominantly overrides the use of the active voice [ 5 , 7 , 8 , 9 ]. For example, Martínez shows a significant drop in active voice use in the Methods sections based on the corpus of 1 million words of experimental full text research articles in the biological sciences [ 7 ]. According to the author, the active voice patterned with “we” is used only as a tool to reveal personal responsibility for the procedural decisions in designing and performing experimental work. This means that while all other sections of the research paper use active voice, passive voice is still the most predominant in Materials and Methods sections.

Writing Materials and Methods sections is a meticulous and time consuming task requiring extreme accuracy and clarity. This is why when you complete your draft, you should ask for as much feedback from your colleagues as possible. Numerous readers of this section will help you identify the missing links and improve the technical style of this section.

Rule 3: Be meticulous and accurate in describing the Materials and Methods. Do not change the point of view within one paragraph.

3.2. writing results section.

For many authors, writing the Results section is more intimidating than writing the Materials and Methods section . If people are interested in your paper, they are interested in your results. That is why it is vital to use all your writing skills to objectively present your key findings in an orderly and logical sequence using illustrative materials and text.

Your Results should be organized into different segments or subsections where each one presents the purpose of the experiment, your experimental approach, data including text and visuals (tables, figures, schematics, algorithms, and formulas), and data commentary. For most journals, your data commentary will include a meaningful summary of the data presented in the visuals and an explanation of the most significant findings. This data presentation should not repeat the data in the visuals, but rather highlight the most important points. In the “standard” research paper approach, your Results section should exclude data interpretation, leaving it for the Discussion section. However, interpretations gradually and secretly creep into research papers: “Reducing the data, generalizing from the data, and highlighting scientific cases are all highly interpretive processes. It should be clear by now that we do not let the data speak for themselves in research reports; in summarizing our results, we interpret them for the reader” [ 10 ]. As a result, many journals including the Journal of Experimental Medicine and the Journal of Clinical Investigation use joint Results/Discussion sections, where results are immediately followed by interpretations.

Another important aspect of this section is to create a comprehensive and supported argument or a well-researched case. This means that you should be selective in presenting data and choose only those experimental details that are essential for your reader to understand your findings. You might have conducted an experiment 20 times and collected numerous records, but this does not mean that you should present all those records in your paper. You need to distinguish your results from your data and be able to discard excessive experimental details that could distract and confuse the reader. However, creating a picture or an argument should not be confused with data manipulation or falsification, which is a willful distortion of data and results. If some of your findings contradict your ideas, you have to mention this and find a plausible explanation for the contradiction.

In addition, your text should not include irrelevant and peripheral information, including overview sentences, as in (6).

6. To show our results, we first introduce all components of experimental system and then describe the outcome of infections.

Indeed, wordiness convolutes your sentences and conceals your ideas from readers. One common source of wordiness is unnecessary intensifiers. Adverbial intensifiers such as “clearly,” “essential,” “quite,” “basically,” “rather,” “fairly,” “really,” and “virtually” not only add verbosity to your sentences, but also lower your results’ credibility. They appeal to the reader’s emotions but lower objectivity, as in the common examples in (7):

7a. Table 3 clearly shows that … 7b. It is obvious from figure 4 that …

Another source of wordiness is nominalizations, i.e., nouns derived from verbs and adjectives paired with weak verbs including “be,” “have,” “do,” “make,” “cause,” “provide,” and “get” and constructions such as “there is/are.”

8a. We tested the hypothesis that there is a disruption of membrane asymmetry. 8b. In this paper we provide an argument that stem cells repopulate injured organs.

In the sentences above, the abstract nominalizations “disruption” and “argument” do not contribute to the clarity of the sentences, but rather clutter them with useless vocabulary that distracts from the meaning. To improve your sentences, avoid unnecessary nominalizations and change passive verbs and constructions into active and direct sentences.

9a. We tested the hypothesis that the membrane asymmetry is disrupted. 9b. In this paper we argue that stem cells repopulate injured organs.

Your Results section is the heart of your paper, representing a year or more of your daily research. So lead your reader through your story by writing direct, concise, and clear sentences.

Rule 4: Be clear, concise, and objective in describing your Results.

3.3. now it is time for your introduction.

Now that you are almost half through drafting your research paper, it is time to update your outline. While describing your Methods and Results, many of you diverged from the original outline and re-focused your ideas. So before you move on to create your Introduction, re-read your Methods and Results sections and change your outline to match your research focus. The updated outline will help you review the general picture of your paper, the topic, the main idea, and the purpose, which are all important for writing your introduction.

The best way to structure your introduction is to follow the three-move approach shown in Table 3 .

Adapted from Swales and Feak [ 11 ].

The moves and information from your outline can help to create your Introduction efficiently and without missing steps. These moves are traffic signs that lead the reader through the road of your ideas. Each move plays an important role in your paper and should be presented with deep thought and care. When you establish the territory, you place your research in context and highlight the importance of your research topic. By finding the niche, you outline the scope of your research problem and enter the scientific dialogue. The final move, “occupying the niche,” is where you explain your research in a nutshell and highlight your paper’s significance. The three moves allow your readers to evaluate their interest in your paper and play a significant role in the paper review process, determining your paper reviewers.

Some academic writers assume that the reader “should follow the paper” to find the answers about your methodology and your findings. As a result, many novice writers do not present their experimental approach and the major findings, wrongly believing that the reader will locate the necessary information later while reading the subsequent sections [ 5 ]. However, this “suspense” approach is not appropriate for scientific writing. To interest the reader, scientific authors should be direct and straightforward and present informative one-sentence summaries of the results and the approach.

Another problem is that writers understate the significance of the Introduction. Many new researchers mistakenly think that all their readers understand the importance of the research question and omit this part. However, this assumption is faulty because the purpose of the section is not to evaluate the importance of the research question in general. The goal is to present the importance of your research contribution and your findings. Therefore, you should be explicit and clear in describing the benefit of the paper.

The Introduction should not be long. Indeed, for most journals, this is a very brief section of about 250 to 600 words, but it might be the most difficult section due to its importance.

Rule 5: Interest your reader in the Introduction section by signalling all its elements and stating the novelty of the work.

3.4. discussion of the results.

For many scientists, writing a Discussion section is as scary as starting a paper. Most of the fear comes from the variation in the section. Since every paper has its unique results and findings, the Discussion section differs in its length, shape, and structure. However, some general principles of writing this section still exist. Knowing these rules, or “moves,” can change your attitude about this section and help you create a comprehensive interpretation of your results.

The purpose of the Discussion section is to place your findings in the research context and “to explain the meaning of the findings and why they are important, without appearing arrogant, condescending, or patronizing” [ 11 ]. The structure of the first two moves is almost a mirror reflection of the one in the Introduction. In the Introduction, you zoom in from general to specific and from the background to your research question; in the Discussion section, you zoom out from the summary of your findings to the research context, as shown in Table 4 .

Adapted from Swales and Feak and Hess [ 11 , 12 ].

The biggest challenge for many writers is the opening paragraph of the Discussion section. Following the moves in Table 1 , the best choice is to start with the study’s major findings that provide the answer to the research question in your Introduction. The most common starting phrases are “Our findings demonstrate . . .,” or “In this study, we have shown that . . .,” or “Our results suggest . . .” In some cases, however, reminding the reader about the research question or even providing a brief context and then stating the answer would make more sense. This is important in those cases where the researcher presents a number of findings or where more than one research question was presented. Your summary of the study’s major findings should be followed by your presentation of the importance of these findings. One of the most frequent mistakes of the novice writer is to assume the importance of his findings. Even if the importance is clear to you, it may not be obvious to your reader. Digesting the findings and their importance to your reader is as crucial as stating your research question.

Another useful strategy is to be proactive in the first move by predicting and commenting on the alternative explanations of the results. Addressing potential doubts will save you from painful comments about the wrong interpretation of your results and will present you as a thoughtful and considerate researcher. Moreover, the evaluation of the alternative explanations might help you create a logical step to the next move of the discussion section: the research context.

The goal of the research context move is to show how your findings fit into the general picture of the current research and how you contribute to the existing knowledge on the topic. This is also the place to discuss any discrepancies and unexpected findings that may otherwise distort the general picture of your paper. Moreover, outlining the scope of your research by showing the limitations, weaknesses, and assumptions is essential and adds modesty to your image as a scientist. However, make sure that you do not end your paper with the problems that override your findings. Try to suggest feasible explanations and solutions.

If your submission does not require a separate Conclusion section, then adding another paragraph about the “take-home message” is a must. This should be a general statement reiterating your answer to the research question and adding its scientific implications, practical application, or advice.

Just as in all other sections of your paper, the clear and precise language and concise comprehensive sentences are vital. However, in addition to that, your writing should convey confidence and authority. The easiest way to illustrate your tone is to use the active voice and the first person pronouns. Accompanied by clarity and succinctness, these tools are the best to convince your readers of your point and your ideas.

Rule 6: Present the principles, relationships, and generalizations in a concise and convincing tone.

4. choosing the best working revision strategies.

Now that you have created the first draft, your attitude toward your writing should have improved. Moreover, you should feel more confident that you are able to accomplish your project and submit your paper within a reasonable timeframe. You also have worked out your writing schedule and followed it precisely. Do not stop ― you are only at the midpoint from your destination. Just as the best and most precious diamond is no more than an unattractive stone recognized only by trained professionals, your ideas and your results may go unnoticed if they are not polished and brushed. Despite your attempts to present your ideas in a logical and comprehensive way, first drafts are frequently a mess. Use the advice of Paul Silvia: “Your first drafts should sound like they were hastily translated from Icelandic by a non-native speaker” [ 2 ]. The degree of your success will depend on how you are able to revise and edit your paper.

The revision can be done at the macrostructure and the microstructure levels [ 13 ]. The macrostructure revision includes the revision of the organization, content, and flow. The microstructure level includes individual words, sentence structure, grammar, punctuation, and spelling.

The best way to approach the macrostructure revision is through the outline of the ideas in your paper. The last time you updated your outline was before writing the Introduction and the Discussion. Now that you have the beginning and the conclusion, you can take a bird’s-eye view of the whole paper. The outline will allow you to see if the ideas of your paper are coherently structured, if your results are logically built, and if the discussion is linked to the research question in the Introduction. You will be able to see if something is missing in any of the sections or if you need to rearrange your information to make your point.

The next step is to revise each of the sections starting from the beginning. Ideally, you should limit yourself to working on small sections of about five pages at a time [ 14 ]. After these short sections, your eyes get used to your writing and your efficiency in spotting problems decreases. When reading for content and organization, you should control your urge to edit your paper for sentence structure and grammar and focus only on the flow of your ideas and logic of your presentation. Experienced researchers tend to make almost three times the number of changes to meaning than novice writers [ 15 , 16 ]. Revising is a difficult but useful skill, which academic writers obtain with years of practice.

In contrast to the macrostructure revision, which is a linear process and is done usually through a detailed outline and by sections, microstructure revision is a non-linear process. While the goal of the macrostructure revision is to analyze your ideas and their logic, the goal of the microstructure editing is to scrutinize the form of your ideas: your paragraphs, sentences, and words. You do not need and are not recommended to follow the order of the paper to perform this type of revision. You can start from the end or from different sections. You can even revise by reading sentences backward, sentence by sentence and word by word.

One of the microstructure revision strategies frequently used during writing center consultations is to read the paper aloud [ 17 ]. You may read aloud to yourself, to a tape recorder, or to a colleague or friend. When reading and listening to your paper, you are more likely to notice the places where the fluency is disrupted and where you stumble because of a very long and unclear sentence or a wrong connector.

Another revision strategy is to learn your common errors and to do a targeted search for them [ 13 ]. All writers have a set of problems that are specific to them, i.e., their writing idiosyncrasies. Remembering these problems is as important for an academic writer as remembering your friends’ birthdays. Create a list of these idiosyncrasies and run a search for these problems using your word processor. If your problem is demonstrative pronouns without summary words, then search for “this/these/those” in your text and check if you used the word appropriately. If you have a problem with intensifiers, then search for “really” or “very” and delete them from the text. The same targeted search can be done to eliminate wordiness. Searching for “there is/are” or “and” can help you avoid the bulky sentences.

The final strategy is working with a hard copy and a pencil. Print a double space copy with font size 14 and re-read your paper in several steps. Try reading your paper line by line with the rest of the text covered with a piece of paper. When you are forced to see only a small portion of your writing, you are less likely to get distracted and are more likely to notice problems. You will end up spotting more unnecessary words, wrongly worded phrases, or unparallel constructions.

After you apply all these strategies, you are ready to share your writing with your friends, colleagues, and a writing advisor in the writing center. Get as much feedback as you can, especially from non-specialists in your field. Patiently listen to what others say to you ― you are not expected to defend your writing or explain what you wanted to say. You may decide what you want to change and how after you receive the feedback and sort it in your head. Even though some researchers make the revision an endless process and can hardly stop after a 14th draft; having from five to seven drafts of your paper is a norm in the sciences. If you can’t stop revising, then set a deadline for yourself and stick to it. Deadlines always help.

Rule 7: Revise your paper at the macrostructure and the microstructure level using different strategies and techniques. Receive feedback and revise again.

5. it is time to submit.

It is late at night again. You are still in your lab finishing revisions and getting ready to submit your paper. You feel happy ― you have finally finished a year’s worth of work. You will submit your paper tomorrow, and regardless of the outcome, you know that you can do it. If one journal does not take your paper, you will take advantage of the feedback and resubmit again. You will have a publication, and this is the most important achievement.

What is even more important is that you have your scheduled writing time that you are going to keep for your future publications, for reading and taking notes, for writing grants, and for reviewing papers. You are not going to lose stamina this time, and you will become a productive scientist. But for now, let’s celebrate the end of the paper.

• Hayes JR. In: The Science of Writing: Theories, Methods, Individual Differences, and Applications. Levy CM, Ransdell SE, editors. Mahwah, NJ: Lawrence Erlbaum; 1996. A new framework for understanding cognition and affect in writing; pp. 1–28. [ Google Scholar ]
• Silvia PJ. How to Write a Lot. Washington, DC: American Psychological Association; 2007. [ Google Scholar ]
• Whitesides GM. Whitesides’ Group: Writing a Paper. Adv Mater. 2004; 16 (15):1375–1377. [ Google Scholar ]
• Soto D, Funes MJ, Guzmán-García A, Warbrick T, Rotshtein T, Humphreys GW. Pleasant music overcomes the loss of awareness in patients with visual neglect. Proc Natl Acad Sci USA. 2009; 106 (14):6011–6016. [ PMC free article ] [ PubMed ] [ Google Scholar ]
• Hofmann AH. Scientific Writing and Communication. Papers, Proposals, and Presentations. New York: Oxford University Press; 2010. [ Google Scholar ]
• Zeiger M. Essentials of Writing Biomedical Research Papers. 2nd edition. San Francisco, CA: McGraw-Hill Companies, Inc.; 2000. [ Google Scholar ]
• Martínez I. Native and non-native writers’ use of first person pronouns in the different sections of biology research articles in English. Journal of Second Language Writing. 2005; 14 (3):174–190. [ Google Scholar ]
• Rodman L. The Active Voice In Scientific Articles: Frequency And Discourse Functions. Journal Of Technical Writing And Communication. 1994; 24 (3):309–331. [ Google Scholar ]
• Tarone LE, Dwyer S, Gillette S, Icke V. On the use of the passive in two astrophysics journal papers with extensions to other languages and other fields. English for Specific Purposes. 1998; 17 :113–132. [ Google Scholar ]
• Penrose AM, Katz SB. Writing in the sciences: Exploring conventions of scientific discourse. New York: St. Martin’s Press; 1998. [ Google Scholar ]
• Swales JM, Feak CB. Academic Writing for Graduate Students. 2nd edition. Ann Arbor: University of Michigan Press; 2004. [ Google Scholar ]
• Hess DR. How to Write an Effective Discussion. Respiratory Care. 2004; 29 (10):1238–1241. [ PubMed ] [ Google Scholar ]
• Belcher WL. Writing Your Journal Article in 12 Weeks: a guide to academic publishing success. Thousand Oaks, CA: SAGE Publications; 2009. [ Google Scholar ]
• Single PB. Demystifying Dissertation Writing: A Streamlined Process of Choice of Topic to Final Text. Virginia: Stylus Publishing LLC; 2010. [ Google Scholar ]
• Faigley L, Witte SP. Analyzing revision. Composition and Communication. 1981; 32 :400–414. [ Google Scholar ]
• Flower LS, Hayes JR, Carey L, Schriver KS, Stratman J. Detection, diagnosis, and the strategies of revision. College Composition and Communication. 1986; 37 (1):16–55. [ Google Scholar ]
• Young BR. In: A Tutor’s Guide: Helping Writers One to One. Rafoth B, editor. Portsmouth, NH: Boynton/Cook Publishers; 2005. Can You Proofread This? pp. 140–158. [ Google Scholar ]

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Research paper

How to Create a Structured Research Paper Outline | Example

Published on August 7, 2022 by Courtney Gahan . Revised on August 15, 2023.

A research paper outline is a useful tool to aid in the writing process , providing a structure to follow with all information to be included in the paper clearly organized.

A quality outline can make writing your research paper more efficient by helping to:

• Organize your thoughts
• Understand the flow of information and how ideas are related
• Ensure nothing is forgotten

A research paper outline can also give your teacher an early idea of the final product.

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Research paper outline example, how to write a research paper outline, formatting your research paper outline, language in research paper outlines.

• Definition of measles
• Rise in cases in recent years in places the disease was previously eliminated or had very low rates of infection
• Figures: Number of cases per year on average, number in recent years. Relate to immunization
• Symptoms and timeframes of disease
• Risk of fatality, including statistics
• How measles is spread
• Immunization procedures in different regions
• Different regions, focusing on the arguments from those against immunization
• Immunization figures in affected regions
• High number of cases in non-immunizing regions
• Illnesses that can result from measles virus
• Fatal cases of other illnesses after patient contracted measles
• Summary of arguments of different groups
• Summary of figures and relationship with recent immunization debate
• Which side of the argument appears to be correct?

Receive feedback on language, structure, and formatting

Professional editors proofread and edit your paper by focusing on:

• Academic style
• Vague sentences
• Style consistency

See an example

Follow these steps to start your research paper outline:

• Decide on the subject of the paper
• Write down all the ideas you want to include or discuss
• Organize related ideas into sub-groups
• Arrange your ideas into a hierarchy: What should the reader learn first? What is most important? Which idea will help end your paper most effectively?
• Create headings and subheadings that are effective
• Format the outline in either alphanumeric, full-sentence or decimal format

There are three different kinds of research paper outline: alphanumeric, full-sentence and decimal outlines. The differences relate to formatting and style of writing.

• Alphanumeric
• Full-sentence

An alphanumeric outline is most commonly used. It uses Roman numerals, capitalized letters, arabic numerals, lowercase letters to organize the flow of information. Text is written with short notes rather than full sentences.

• Sub-point of sub-point 1

Essentially the same as the alphanumeric outline, but with the text written in full sentences rather than short points.

• Additional sub-point to conclude discussion of point of evidence introduced in point A

A decimal outline is similar in format to the alphanumeric outline, but with a different numbering system: 1, 1.1, 1.2, etc. Text is written as short notes rather than full sentences.

• 1.1.1 Sub-point of first point
• 1.1.2 Sub-point of first point
• 1.2 Second point

To write an effective research paper outline, it is important to pay attention to language. This is especially important if it is one you will show to your teacher or be assessed on.

There are four main considerations: parallelism, coordination, subordination and division.

Parallelism: Be consistent with grammatical form

Parallel structure or parallelism is the repetition of a particular grammatical form within a sentence, or in this case, between points and sub-points. This simply means that if the first point is a verb , the sub-point should also be a verb.

Example of parallelism:

• Include different regions, focusing on the different arguments from those against immunization

Coordination: Be aware of each point’s weight

Your chosen subheadings should hold the same significance as each other, as should all first sub-points, secondary sub-points, and so on.

Example of coordination:

• Include immunization figures in affected regions
• Illnesses that can result from the measles virus

Subordination: Work from general to specific

Subordination refers to the separation of general points from specific. Your main headings should be quite general, and each level of sub-point should become more specific.

Example of subordination:

Division: break information into sub-points.

Your headings should be divided into two or more subsections. There is no limit to how many subsections you can include under each heading, but keep in mind that the information will be structured into a paragraph during the writing stage, so you should not go overboard with the number of sub-points.

Ready to start writing or looking for guidance on a different step in the process? Read our step-by-step guide on how to write a research paper .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Gahan, C. (2023, August 15). How to Create a Structured Research Paper Outline | Example. Scribbr. Retrieved September 12, 2024, from https://www.scribbr.com/research-paper/outline/

Is this article helpful?

Courtney Gahan

Other students also liked, research paper format | apa, mla, & chicago templates, writing a research paper introduction | step-by-step guide, writing a research paper conclusion | step-by-step guide, get unlimited documents corrected.

✔ Free APA citation check included ✔ Unlimited document corrections ✔ Specialized in correcting academic texts

How Long Should a Research Paper Be?

How Long Should A Research Paper Be? An Overview

In short, research paper's average length can range from 1,500 words for research proposals and case studies - all the way to 100,000 words for large dissertations.

Research, by its nature of being complex, requires a careful and thorough elucidation of facts, notions, information, and the like - which is all reflected in its most optimal length.

Thus, one of the critical points that you need to focus on when writing either a complex research paper or a less complex research paper is your objective and how you can relay the latter in a particular context. Say you are writing a book review. Since you will only need to synthesize information from other sources to solidify your claim about a certain topic, you will perhaps use paraphrasing techniques, which offer a relatively lower word count when compared to a full-blown descriptive research paper.

Even when both types of research differ in word counts, they can effectively attain their objectives, given the different contexts in which they are written and constructed. 

Certainly, when asked about how long is a research paper, it surely depends on the objective or the type of research you will be using. Carrying out these objectives will warrant you to do certain paper writing tasks and techniques that are not necessarily long or short when you compare them to other research types. 

At Studyfy, we care for the attainment of your research objectives. We understand that achieving such will contribute to the success of your research completion. While maintaining the ideal word count for a research paper, you are in a meaningful position to understand the various elements that can enrich your paper, even if it looks overwhelming.

How Long Should the Introduction of a Research Paper Be?

The research introduction section most likely occupies approximately 30-40% of the entire research paper.

The introduction of a regular academic paper can total 1750-2000 words depending on the research type and complexity of the research niche or topic. That is why, in writing this section, you must enrich the content of your paper while maintaining readability and coherence for the benefit of your readers.

The introduction houses the background of the study. This is the part of the paper where the entire context of the paper is established. We all know that the research context is important as it helps the readers understand why the paper is even conducted in the first place. Thus, the impression of having a well-established context can only be found in the introduction. Now that we know the gravity of creating a good introduction, let us now ask how long this section should be.

Generally speaking, the paper’s introduction is the longest among all the sections. Aside from establishing the context, the introduction must house the historical underpinnings of the study (important for case studies and ethnographic research), salient information about all the variables in the study (including their relationship with other variables), and related literature and studies that can provide insight into the novelty and peculiarities of the current research project.

To better understand the general composition of your research introduction, you may refer to the breakdown of this section below:

• Context Establishment and Introduction of Key Terms. In this subsection, you will articulate the background (historical, social, economic, psychological, etc.) of the study, including the ecosystem and the niche of your study interest. Furthermore, key terms found as variables in your study must be properly defined operationally and theoretically, if necessary. This comprises 20% of the introduction, or about 350-500 words.
• Related Literature and Studies. This is the subsection where you will criticize and integrate existing literature and studies to highlight the research gap that you intend to fill in. This comprises 25% of the introduction or about 450-600 words.
• Thesis statement. This part of the introduction can only be a paragraph or a couple of sentences, as this needs to be straightforward in relaying the identified research gap of the researchers. This comprises 5% of the introduction or about 90-100 words.
• Objectives or Research Questions. This subsection should outline the aims of the study, especially highlighting the inquiries that concern the relationship between the variables and how the research will progress to fill in the identified gaps. This comprises 5% of the introduction or about 90-100 words.

Theoretical and/or Conceptual Framework. These frameworks, when better assisted with a visual representation, guide the entire research process and provide a structure for understanding the relationship between the variables in the study. This comprises 10% of the introduction or about 180-200 words.

Struggling with your Research Paper?

Get your assignments done by real pros. Save your precious time and boost your marks with ease.

Elements of Good Research Writing Process– While Maintaining the Ideal Word Count!

• Clarity of Purpose . All types of writing, whether long or short, have its clarity of purpose as the heart of the text. In research, it is manifested through the inclusion of a research question or hypothesis. A good research paper does not repeat these elements without a purpose in mind. Though they can be emphasized throughout the development of the paper, the manner of doing it must be in a logical and purposeful way. 

To guide you in writing process of doing so, you can ask yourself the following questions:

• Is the research question or hypothesis clearly stated?
• Does the introduction provide a clear overview of the purpose of the study?
• Does the purpose of the study repeat purposefully in the latter sections of the paper?
• Does the purpose of the study repeat logically in the latter sections of the paper?

2. Literature Review . When appending related literature and studies to your paper, the question must not revolve around whether you have supplied a lot of these pieces of information, making your article wordy and ideal. While the literature review adds a significant ‘chunk’ to your paper, with some paper formats even allotting a specific section for it, we must carefully consider what and how we can integrate them. It subsequently entails a critical analysis of a piece of literature or study and logically places it beside information that you desire to contest. As they say, a good literature review identifies knowledge gaps, highlights the author’s familiarity with the topic, and provides an overview of the research areas that show a disparity of agreement. In order to have these characteristics, you can ask yourself the following questions:

• Have I integrated relevant literature in my review?
• Have I placed it logically within a specific piece of information based on my presumption?
• Do they identify a concept or piece of information that is otherwise unknown to the field?
• Have I critically analyzed existing research to identify the research gap?

3. Logical Flow. Research will not be whole without its parts. Researchers must know how to tie everything together and ensure that each part is functional in itself and supplements with other parts. When dealing with a large body of text, the logical flow of the paper might be a considerable concern. Along with the confusion brought about by the wordiness and complexity of the topic, your readers might get lost because of incoherence and inconsistencies with the presentation of ideas, leading to them not reading your paper any further. Thus, while ensuring that you get the word count that you want, you might want to ask yourself these questions first:

• Does the introduction progress logically from the general background to the specific research question?
• Do the transition devices between sections and individual paragraphs of the body facilitate a smooth flow of ideas?
• Is there a clear hierarchy of ideas, with each paragraph contributing to the overall argument?
• Have I organized ideas in a way that makes the document easy to track?
• Have I pursued a logical sequence of presenting information?

4. Language Use and Style. Developing an academic language throughout your paper and maintaining a formal style of paper writing are all the more important in research writing process, and mind you, it can also help you increase your word count in a sustainable way! Incorporating this form of language and style into your paper entails more than just adding incoherent or overly manufactured words that may be viewed as fillers.

Strategies and known practices are said to hit multiple objectives without compromising the quality of the paper. You may expand your points by providing detailed explanations, introducing sufficient pieces of evidence that supports your claims, addressing counterargument through the presentation of related literature or studies, or clarifying complex concepts through chunking. To better understand these techniques, some of these questions might be helpful for you:

• Is the language clear and concise?
• Have I avoided unnecessary jargon or complex sentences or paragraphs?
• Have I avoided repetition or redundancy in the document?
• Have I expanded on key points by providing more detailed explanations and examples?
• Have I discussed nuances, variations, or exceptions to your results?
• Have I clarified some complex concepts or theories by chunking them into more detailed explanations?

How Long Should a Paragraph Be in a Research Paper?

For the research paper introduction section, a typical paragraph count will be 12-15, excluding the literature review section. Each subsection has 1-2 individual paragraphs. The mentioned section, on the other hand, can have paragraphs totaling 10-20. The conclusion section, on the other hand, is considered ideal if it has 5-7 paragraphs. 

The paragraph count differs from one research type to another and even from one paper section to another. While it is worth deciding how long should a paragraph be in a research paper, it is more important to take note of the importance of ideas that should be included in each paragraph within a certain section. Take the review of the literature section as an example. The number of literature in the paper is said to be equal to the number of paragraphs allotted for the section. The reason lies in the uniformity of importance these pieces of literature hold, provided that they are closely associated with the research gap. 

Do you feel like you need to pay for a research paper in hopes of finding a model article with the right paragraph count? Look no further, as Studyfy has its in-house research paper writing service that houses professionals and experts for your academic paper writing help. Its reasonable price– no deadline markup nor additional hidden charges– is tantamount to the expertise each writer has put into their work.

Did you like our inspiring Research Paper Guide?

For more help, tap into our pool of professional writers and get expert essay editing services!

How Long Should a Conclusion Be in a Research Paper?

A concluding section, then, must only comprise 5% of the total word count of the paper, translating to approximately 400 words. This measly allocation may put you into a flimsy situation, especially if you do not know how to manage your vocabulary well and you keep on adding filler words that can sacrifice the importance of this section. Ditch the nonsense and construct your conclusion in a concise yet enriching way.

In concluding a research paper, it is important to always synthesize the big chunks of information examined in the data analysis and discussion. As worn out as the reader may look after reaching this point, the conclusion must act as a “mellow point” for them, entrusting them only with important pointers of the study. Sometimes, the conclusion part of the paper, even though less wordy than its preceding sections, may be difficult to construct, as you still need to have a basis– a scaffold– to refer to, and synthesizing, just like analyzing and evaluating data, is just as hard and laborious.

Through its superb essay writing services , plus applying top-notch quality assurance to academic papers like research articles, Studyfy can help you achieve the best for last with an effective, meaningful, and content-rich conclusion. Your readers will not think twice about using your study as a model for their own works!

How Long is a Research Paper in terms of its Various Types?

As mentioned in the first part of the article, the word count of an academic paper is dependent on the type of research you wish to conduct. While the general word count has been given, we cannot deny the fact that this threshold is only an estimation. There might be a time when you are tasked to create a research article that is different from a standard IMRAD-structured (Introduction, Methodology, Results, Analysis, Discussion) research paper. You are in for a treat, as we will provide you with a cheat sheet for the word count of several types of write-ups in the realm of research:

Research Proposal

Specific Purpose/s: A preliminary outline that contains the research question, minimal literature review, methodology, and significance of the research undertaking.

"Word Count Range: 1500-3000 words"

Review Article

Specific Purpose/s: Review bodies of literature about an overarching topic or niche, analyze a particular section, synthesize according to certain themes, and identify knowledge gaps from the findings.

"Word Count Range: 5000-10,000 words"

Meta-Analysis

Specific Purpose/s: Involves the use of statistical analyses of multiple studies to provide a quantitative synthesis of the evidence.

"Word Count Range: 5000-15,000 words"

Specific Purpose/s: Presents an in-depth and intrusive analysis of a specific case, one which aims to illustrate a broader concept or novel phenomenon.

"Word Count Range: 1500-5000 words"

Conference Paper

Specific Purpose/s: Presents a brief introduction, salient research findings, and implications connected to a given theme by a conference or colloquium.

"Word Count Range: 2000-5000 words"

Dissertation

Specific Purpose/s: Regarded as a terminal scholarly requirement for doctorate students, this is an in-depth discussion of an otherwise original research finding, often written in chapters. It contributes significantly to the body of knowledge of a particular study of interest.

"Word Count Range: 50,000-100,000 words (depending on the institution)"

Are you contemplating buying research papers of different types? Studyfy got your back! Its roster of writers and editing experts leaves no space for errors, ensuring that both quality and quantity– that’s right: content and word count are not compromised. The variety of expertise within ensures that all research and scholarly works are delivered to your liking. Pay less– no hidden charges and markups while you enjoy the best quality of writing with Studyfy.

Frequently Asked Questions

How long is the introduction in a research paper.

AThe introduction takes up about 30-40% of the entire paper since the context and research background should be specified and further discussed. For a general academic paper with 4000 words, the introduction must be approximately 1500 words. You can do the math for the rest!

How long is a research paper, considering that there are many of them?

There is no one-size-fits-all guideline in determining the word count of a plethora of research papers in the world. Although there is an accepted word count range for each research type (as presented in the previous section), there are several factors that should likewise be considered in determining the word count: specific guidelines set by the institution you are working with, the complexity of the topic, audience, and depth of analysis. 

Do I have to include all of the prescribed subsections of the introduction to increase the word count?

While the prescribed subsections have significant functions in the research paper introduction, some of them are not required to be included. The decisions depend on the type of research you wish to conduct and the external guidelines that you might need to follow. Some disciplines, such as social sciences, require a research article to have a theoretical framework, whereas others do not. Some research papers follow the standard IMRAD paper format that infuses the literature review section into the introduction, while the Germanic Thesis paper format, for example, regards the former as a separate section.

How do I increase my word count without compromising the quality of my research paper?

The dilemma of choosing quality over quantity has long been debunked: you do not have to choose in the first place. All you need is a set of writing strategies and techniques that will target those two birds using one stone. You may provide more detail to some ambiguous or novel terms. You can add additional works of literature to some concepts that promote abstraction. You may include examples or empirical pieces of evidence to create a more concrete representation of a concept or theory. Lastly, you may use subheadings to efficiently allocate word count for your chosen discussion topics.

Why is it important to track the word count of a research paper?

There are various reasons why we need to do it. Some institutions that publish scholarly journals follow certain guidelines in word count as one of the primary requirements. A specified limit enables researchers to allocate the number of words to several sections of their writing efficiently. Most institutions also use paper length as a predictor of publication cost. The longer the word count is, the costlier the publication will be. Lastly, reading engagement is affected by word count, as readers tend to shy away from reading an article that is long, boring, and insubstantial. 

Can a writing service help me achieve my goals of writing within the right word count range?

Certainly! Studyfy offers several academic services, including writing services and Excel assignment help . Understanding your various writing needs, writers can cater to the needed style, word count, formatting, and any other aspects so that you can have the best quality write-up without having to fear extra charges and big markups.

How Long Should a Research Paper Be? Data from 61,519 Examples

I analyzed a random sample of 61,519 full-text research papers, uploaded to PubMed Central between the years 2016 and 2021, in order to answer the questions:

What is the typical overall length of a research paper? and how long should each section be?

I used the BioC API to download the data (see the References section below).

Here’s a summary of the key findings

1- The median length of a research paper is 4,133 words (equivalent to 166 sentences or 34 paragraphs), excluding the abstract and references, with 90% of papers being between 2,023 and 8,284 words.

2- A typical article is divided in the following way:

• Introduction section: 14.6% of the total word count.
• Methods section: 29.7% of the total word count.
• Results section: 26.2% of the total word count.
• Discussion section: 29.4% of the total word count.

Notice that the Materials and methods is the longest section of a professionally written article. So always write this section in enough depth to provide the readers with the necessary details that allow them to replicate your study if they wanted to without requiring further information.

Overall length of a research paper

Let’s start by looking at the maximum word count allowed in some of the well-known journals. Note that the numbers reported in this table include the Abstract , Figure legends and References unless otherwise specified:

[1] excluding figure legends [2] excluding references

⚠ Note A review paper is either a systematic review or a meta-analysis, and an original research paper refers to either an observational or an experimental study conducted by the authors themselves.

Notice the large variability between these journals: The maximum number of words allowed ranges between 3,000 and 9,000 words.

Next, let’s look at our data.

Here’s a table that describes the length of a research paper in our sample:

90% of research papers have a word count between 2,023 and 8,284. So it will be a little weird to see a word count outside of this range.

Our data also agree that a typical review paper is a little bit longer than a typical original research paper but not by much (3,858 vs 3,708 words).

Length of each section in a research article

The median article with an IMRaD structure (i.e. contains the following sections: Introduction , Methods , Results and Discussion ) is in general characterized by a short 553 words introduction. And the methods, results and discussion sections are about twice the size of the introduction:

For more information, see:

• How Long Should a Research Title Be? Data from 104,161 Examples
• How Long Should the Abstract Be? Data 61,429 from Examples
• How Long Should the Introduction of a Research Paper Be? Data from 61,518 Examples
• How Long Should the Methods Section Be? Data from 61,514 Examples
• How Long Should the Results Section Be? Data from 61,458 Examples
• How Long Should the Discussion Section Be? Data from 61,517 Examples
• Length of a Conclusion Section: Analysis of 47,810 Examples
• Comeau DC, Wei CH, Islamaj Doğan R, and Lu Z. PMC text mining subset in BioC: about 3 million full text articles and growing,  Bioinformatics , btz070, 2019.

Stack Exchange Network

Stack Exchange network consists of 183 Q&A communities including Stack Overflow , the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Q&A for work

Connect and share knowledge within a single location that is structured and easy to search.

How to write a strong introduction into a research paper?

How does one write a strong (good) introduction into a research paper? Some introductions make me really curious about the rest of the paper while others do not. Although it is relatively easy to say which introductions are good and which are not, I find it difficult to distill what makes the difference. There is a previous question about writing introductions ( How to write a Ph.D. thesis Introduction chapter? ) but it is about Ph.D theses.

• publications
• introduction

• 10 write the paper first, then tack on a beginning and end. that way you will know what its about. –  nathan hayfield Commented Jan 2, 2014 at 16:37
• 22 Here's a bit of meta-advice on this point. One major way I've learned how to improve introductions is by thinking hard about negative referee reports. In my experience, when a paper gets a referee report that I disagree with, the explanation is often that the introduction needed to be clearer about something. –  Noah Snyder Commented Jan 3, 2014 at 3:56
• 11 @Noah's advice is spot on (although one might aspire to write a good introduction earlier in the day than this) and really points to the importance of the question: the difference between an average introduction and a good one is often the difference between your paper being grokked or not by some fairly random referee who has sufficient subject-level expertise but is not closely clued in to your particular perspective. –  Pete L. Clark Commented Mar 30, 2014 at 20:26

5 Answers 5

This is very area specific. I'll start with the caveat that I write papers in computer science, so YMMV.

The way I think about introductions (which is not to say they are GOOD introductions) is that they tell the story of the paper in brief. Every paper has a story to tell, starting with

• Here's a fascinating question
• Here's what people have tried to do (in brief: not a full related work section, but a high level assesment)
• here's the key challenge preventing further progress
• Voila: here's our complete/partial/intermediate/awesome solution
• (additionally) and here's how it works.

The intro is typically the "hook" to read the rest of the paper, so you have to provide a birds-eye view that draws the reader in without drowning them in details.

The thing that separates a good intro from a bad one is knowing where that right level of detail is, so you're not either totally vacuous or mired in details. Getting this right is an art and depends on your field, your results, the problem, and your understanding of the target audience.

• 14 A few pure theory papers begin with "Let X be a..." instead of "Hey look at this shiny rock I found." –  JeffE Commented Jan 2, 2014 at 0:44
• This is similar to Simon Peyton Jones's approach –  ThomasH Commented Mar 2, 2015 at 22:59

I was recently forwarded (what I think) is a guide full of excellent advice, Writing Tips for Ph. D. Students by John Cochrane . In it, Cochrane has a brief section of advice on the introduction:

The introduction should start with what you do in this paper, the major contribution. You must explain that contribution so that people can understand it. Don’t just state your conclusion: “My results show that the pecking-order theory is rejected.” Give the fact behind that result. “In a regression of x on y, controlling for z, the coefficient is q.” The first sentence is the hardest. Do not start with philosophy, “Financial economists have long wondered if markets are efficient.” Do not start with “The finance literature has long been interested in x.” Your paper must be interesting on its own, and not just because lots of other people wasted space on the subject. Do not start with a long motivation of how important the issue is to public policy. All of this is known to writers as “clearing your throat.” It’s a waste of space. Start with your central contribution. Three pages is a good upper limit for the introduction.

This just reiterates the point both Oldboy and Suresh made that the introduction should clearly state what the paper is about, and also some more detailed advice about avoiding generic intro. statements. (Note the upper bound is good for social science articles that may be from 20~40 pages, it should be much lower for briefer articles in different fields or journals.)

• 1 Yes, I read something somewhere before about these types of generic introductory phrases, calling the practice "grandfathering" ... which is the idea of writing passages out of a sense of tradition in such a way that they are extremely familiar only to experts and incomprehensible to anyone else. Hence these passages are utterly useless since nobody learns anything. It seems introductions to papers are littered with them. I do it myself I guess. Bad habits. :) –  badroit Commented Jan 3, 2014 at 15:07
• 2 After I read this advice @badroit I went through my current papers and edited such things out. When I first write something I don't care very much about specific sentences, and if writing such things helps get the ball rolling then that is fine - but they should be deleted or copy-edited later on. –  Andy W Commented Jan 3, 2014 at 15:54
• I've seen suggestions to use such statements as hyperbole to establish interest in the work in the introduction. E.g. if I wrote a paper about police stops in New York City I may allude to the Diallo shooting in the intro. This is IMO bad practice though, as they tend to be such aloof references to the current work they are basically meaningless. This post discusses similar behavior in citing generic original work, Sociology citing Becker . –  Andy W Commented Jan 3, 2014 at 15:57

Some points to take into consideration (not an exhaustive list):

• Correct grammar: for obvious reasons.
• Proper literature review: many readers find annoying when the authors claim to be the first people attacking the problem of interest, while the reader is well aware of other relevant references.
• State clearly the aims and main results in the introduction. It is frustrating when you have to read the entire paper to understand its purpose.
• Not too long, not too short. A long introduction will make the idea of skipping this section really tempting, while a short introduction might compromise clarity or points 2 and 3.
• Cover points of interest for different audiences. For example, try to explain the impact of the paper or the topic in terms of both theoretical and practical issues.

• Make a concrete analogy. A concrete analogy will intertwine to the text and allow room for the readers to project their background into it.
• Make the ideas constantly contradict each other. "Contradiction" here doesn't mean as a logical contradiction, but more about "a surprising, but still logical step of development". It introduces why the topic is important, and is the source of excitation, enlightenment, and satisfaction. Being able to solve contradictions is the reason why the ideas survive and are worth the attention.
• Notice where the flow emerges and dissipates . This will help overcome the jargon barrier without having to oversimplify them. Imagine the article is like a heatmap, and each jargon/theorem/proof is a heat source, then the writer's job is to locate them not too hot (too dense) or too cold (too uninformative). The introduction is also the same.

I have an article for this, you can check it out: Making concrete analogies and big pictures .

Start writing the body paragraphs then use the basic ideas of all of them and then create an introduction and concluding paragraphs!

• 7 This advice might be helpful to young students writing a typical 5-paragraph essay, but it isn't really applicable to postgrads writing a research paper. Also, we usually expect answers to be more than just once sentence. –  mhwombat Commented Dec 4, 2014 at 0:05

You must log in to answer this question.

Not the answer you're looking for browse other questions tagged publications writing introduction ..

• Featured on Meta
• Site maintenance - Mon, Sept 16 2024, 21:00 UTC to Tue, Sept 17 2024, 2:00...
• User activation: Learnings and opportunities
• Join Stack Overflow’s CEO and me for the first Stack IRL Community Event in...

Hot Network Questions

• Difference between 2 version numbers from `adb --version`
• mmrm R package : No optimizer led to a successful model fit
• Definition of annuity
• Keyboard shortcuts for running last command with changes?
• O(nloglogn) Sorting Algorithm?
• Doesn't nonlocality follow from nonrealism in the EPR thought experiment and Bell tests?
• How did people know that the war against the mimics was over?
• Movie where a young director's student film gets made (badly) by a major studio
• Place with signs in Chinese & Arabic
• How can a microcontroller (such as an Arduino Uno) that requires 7-21V input voltage be powered via USB-B which can only run 5V?
• Why does Sfas Emes start his commentary on Parshat Noach by saying he doesn't know it? Is the translation faulty?
• Why is the area covered by 1 steradian (in a sphere) circular in shape?
• Should I change advisors because mine doesn't object to publishing at MDPI?
• Drill perpendicular hole through thick lumber using handheld drill
• Subject verb agreement - I as well as he is/am the culprit
• Why did early ASCII have ← and ↑ but not ↓ or →?
• Is "my death" a/the telos of human life?
• For a bike with "Forged alloy crank with 44T compact disc chainring", can the chainring be removed?
• ASCII 2D landscape
• Was Willy Wonka correct when he accused Charlie of stealing Fizzy Lifting Drinks?
• What prevents indoor climbing gyms from making a v18 boulder even if one hasn't been found outside?
• Should tiny dimension tables be considered for row or page compression on servers with ample CPU room?
• Is it possible to draw this picture without lifting the pen? (I actually want to hang string lights this way in a gazebo without doubling up)
• Custom PCB with Esp32-S3 isn't recognised by Device Manager for every board ordered